Produktinformasjon
F7-flightcontroller for FPV-droner i stack med 4x50A ESC. Designet for å fungere optimalt med DJIs HD FPV system og kan tilkobles med den originale pluggen til DJI-systemet. Samtidig er USB-micro byttet ut med USB-C, likt som for DJI.
SucceX-D F7 benytter to gyroer plassert ved siden av hverandre med 90 grader offset og bruker GYRO FUSION i Betaflight for å kombinere signalene. Dette gir et renere signal med mindre forstyrrelser til PID-reguleringen.
FC - SpesifikasjonerMCU | 216MHz STM32F722 |
Vekt | 6gram |
Gyro | 2x ICM20689 |
Blackbox | 32Mb innebygget |
Uart | 5stk |
ESC-port | 8-pin 4-in-1 |
DJI Air Unit-port | 6-pin |
Monteringshull | 30.5mm @3mm |
ESC - SpesifikasjonerMCU | STM32F051 |
Kondensator | 470uF/50V |
Currentsensor | Ja |
Inn-spenning | 2-6s |
BlHeli32 | Ja |
Kompatibilitet | Dshot1200, Proshot, Oneshot, Multishot |
Vekt | 14.4gram |
Product details in english
The SucceX-D Mini F7 is designed to work seamlessly with DJI?s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.
But the real magic of this flight controller lies in its TWIN GYRO configuration.
The TwinG uses two identical gyros oriented side by side with one offset 90 degrees from the other. Betaflight uses GYRO FUSION to blend and average the information from both gyros to send a much cleaner signal to the PID loop controller! Less noise and fewer oscillations across the throttle band without adding any delay! Betaflight software filters can be lowered in most cases as well, which brings a significant decrease in delay.
With plenty of processing power and UARTS, this is also the perfect flight controller for long-range GPS builds. And the TwinG configuration makes it the perfect FC for builds like macro quads, cinematic filming rigs and x-class racers that are a bit trickier to tune.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!