SOMMERSALG! KLIKK HER!
HjemRadioutstyrHeliutstyrFlybarless
Print produktark

Align MiniGRS Flybarless System

Produsent Align
Tilhører kategori
Flybarless
Handle nå, del opp eller betal senere. Walley Les mer
kr 1.095,-
Kjøp
Overvåk
+
-
Husk i favoritter
3|1|296
VareID: 41171, Produktnr: HEGGRS01T
LoadWalleyWidget
Produktinfo
Tips en venn
Anmeldelser

Produktinformasjon

Flybarless system designet for Align sine mindre helikopter. Passer 250, 450, 470 og 500 modeller.
Spesifikasjoner
Spenning:3.5-8.4V
Støttede mottakere:ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
Størrelse:37.6x22.4x13mm
Sensoroppløsning:12 BIT


Innhold
  • MiniGRS electronics board set x 1
  • MiniGRS Signal Wire x 1
  • MiniGRS Binding Plus x 1
  • Plastic flat screwdriver black × 1
  • Double Sided Tape x 1
    • Product details in english
  • Special design for ALIGN small helicopters. Its light and simple.
  • Support the latest new ALIGN A10 Radio (10-channel/A.BUS system) for the best working operation.
  • Support T-REX 250/450/470/500 models, no need to setup, outstanding flight performance for the beginner or 3D pilot.
  • Support JR DSM2 and Spektrum DSM2/DSMX satellite. Built-in Futaba S-FHSS 2.4GHz support for Futaba S-FHSS transmitter.


    • Specification:
  • Operating voltage range: DC 3.5~8.4V
  • Operating current consumption: <100mA @ 4.8V
  • Rotational detection rate: ±300°/sec
  • Rudder yaw detection rate: ±600°/sec
  • Sensor resolution: 12 BIT
  • Swashplate Support: 120° CCPM Swashplate
  • Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
  • Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
  • Operating temperature: -20? ~ 65?
  • Operating humidity: 0% ~ 95%
  • Comply with RoHS
  • Size: 37.6x22.4x13mm


    • Accessories:
  • MiniGRS electronics board set x 1
  • MiniGRS Signal Wire x 1
  • MiniGRS Binding Plus x 1
  • Plastic flat screwdriver black × 1
  • Double Sided Tape x 1
    • Mer info på Engelsk
    Flere detaljer
    Del av PartFinder
    Flere så også på