Produktinformasjon
Sentral Box 400 er en boks designet for komplett kontroll av alle kanalene i en modell, hvor det er lagt vekt på sikkerhet. Sentral Box har et unikt design som gir overbelastningsvern på hver servoutgang. Sentral Box400 støtter også Jeti EX telemetrisystemet fullt ut. Opptil to mottakere (PPM, EX Bus) kan kobles til Central Box.
Med Jeti DC / DS-senderen, kan det fulle potensialet av Central Box utnyttes, som blant annet gir deg muligheten til å sette opp hver individuelle servo-port med ønsket kanal, servo hastighet, revers og trim. Central Box400 har også datalagring, dette gir deg muligheten til å hente ut sensordata fra tidligere flyturer.
Iinformasjon fra produsent
Weight 270GDimensions [mm] 131x88 x19Sustained current [A] 30Number of channels 24Telemetry YesOperational temperature -20 - 75°CCompatible protocols EX Bus, PPM, UDISupply Voltage 6 - 17VSatellite receiver support YesBatteries NiXX 6 - 12Batteries LiXX 2 4Number of battery inputs 2Voltage stabilization yesPeak current (2s) [A] 230
The Central Box 400 is a switchboard designed for the complete management of servos in large to giant models with an emphasis on safety. The Central Box 400 has a unique design that provides overload protection at each servo output. An independent, very powerful BEC (battery eliminator circuit) for each battery input makes the Central Box an optimal solution to connect up to 24 servos. The Central Box 400 can manage the batteries and fully supports the JETI EX telemetry system. Up to two receivers with serial (PPM, EX Bus, UDI) output can be connected to the Central Box 400. With a JETI DC/DS transmitter, the full potential of the Central Box can be used, such as easy configuration of the Central Box, EX telemetry, and very fast servo response.
Central Box 400 supports up to 24 protected servo outputs, two battery inputs with voltage regulators and incorporates possibility to connect an RC or magnetic switch.
Attributes
Two independent high-powered BEC´s for voltage stabilization of servosOverload protection on each channelOverload protection on Rx, Ext, and Switch outputsPossibility to connect up to 2 receivers with serial interface (PPM, EX Bus, UDI)Built-in Expander function for up to 4 sensorsInput for magnetic switch or RC switchMPX battery input connectors: 2xStabilized voltage output via a pair of MPX connectors100Hz mode of servo outputs (10ms period)Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)Easy settings changes via DC/DS transmitterInternal memory for storage of telemetry dataUSB connectivity for connection to PCEasy settings changes via DC/DS transmitterFirmware updatableSuitable for use with high voltage (HV) servosRobust metal construction with mounting holesLED status indicationEach output is individually configurable (channel assignment, trim, reverse, ATV)
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!