Produktinformasjon
Jeti Mspeed 450 gir deg mulighet til å måle hastigheten ved hjelp av luftstrøm. Man kan også sette en alarm til å gå av hvis modellen f.eks. går under "stall speed".
Spesifikasjoner
Weight: 21gDimensions: 22 x 25 x 13 mmOperational temperature: 0 - 85 °CSupply Voltage: 3,5 - 8,4VAverage Current: 10 mAMaximum speed: 450km/h
Informasjon fra produsent
SPEED 450 EX is a sensor which measures the speed of a flying model through the air to provide the indicated airspeed (IAS). The reporting of airspeed can be very instructive with regard to the control of a flying model, for example allowing the pilot to determine the modelŽs stall speed and set an alarm to indicate when the model falls below this speed.
Maximum speed: 450km/h
Another function of the sensor is to allow the pilot to set a desired speed and a step above or below this speed at which an acoustic signal should be sounded by the transmitter module. To facilitate easier reading of the indicated airspeed, a bar graph is displayed, marking the appropriate configured steps. The measurement of airspeed is based on the principle of change in dynamic pressure, measured by a Pitot tube, which is connected by silicon tubing. With the help of the wireless Duplex system, this sensor information can be reported to the pilot in realtime, allowing immediate feedback in airspeed changes and a deviations from the configured steps.
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!