Print produktark

Mateksys F765-WSE OSD Flight Controller

Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Tips en venn
Anmeldelser

Produktinformasjon

Mateksys F765-WSE OSD Flight Controller
Spesifikasjoner
MCUSTM32F765VIH6, 216MHz , 512KB RAM, 2MB Flash
IMUICM42688-P (SPI4)
BarometerDPS310 (I2C2)
OSDAT7456E (SPI2)
BlackboxMicroSD card slot (SDIO)
Uarts6.5 (built-in inversion)
12xPWM Outouts
Innspenning2-6s LiPo


Dimensjoner
  • Mounting: 25 x 25mm, ø2mm
  • Dimensjoner: 44 x 29 x 14.5 mm
  • Vekt: 22g m/buzzer adapter


  • Innhold
  • 1x F765-WSE
  • 1x USB(Type-C)/Beep (Passive buzzer) Extender
  • 2x 20cm JST-GH-4P til JST-GH-4P kabel for CAN & I2C port
  • 1x 20cm JST-SH-6P til JST-SH-6P kabel for USB extender
  • 1x Rubycon ZLH 35V 470uF kapasitator
  • Dupont 2.54 pins
  • Product details in english
    FC Specs
  • MCU: STM32F765VIH6, 216MHz , 512KB RAM, 2MB Flash
  • IMU: ICM42688-P (SPI4)
  • Baro: DPS310 (I2C2)
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD card slot (SDIO)
  • 6.5x Uarts (1,2,3,Rx5,6,7,8) with built-in inversion.
  • 1x Softserial1_Tx (INAV)
  • 12x PWM outputs (S1-S10 support Dshot)
  • 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 2x I2C
  • 1x CAN
  • USB/Beep Extender with Type-C(USB2.0)
  • Dual Camera Inputs switch
  • 9V(12V) for VTX power switch
  • High-precision Current Sense, 220A range
  • ADC VB2 voltage divider: 1K:20K
  • ADC AirSpeed voltage divider: 20K:20K
  • Static power 160mA@5V


  • FC Firmware
  • INAV: MATEKF765SE
  • ArduPilot: MATEKF765SE


  • PDB
  • Input voltage range: 6.8-30V (2-6S LiPo)
  • 1x ESC power pads
  • Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
  • Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
  • Sense resistor: 90A continuous, 220A peak


  • BEC
  • BEC 5V output
  • BEC 9V /12V output
  • BEC Vx output
  • BEC 3.3V output


  • Physical
  • Mounting: 25 x 25mm, ø2mm
  • Dimensions: 44 x 29 x 14.5 mm
  • Weight: 22g w/ USB/buzzer adapter


  • Including
  • 1x F765-WSE
  • 1x USB(Type-C)/Beep (Passive buzzer) Extender
  • 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
  • 1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
  • 1x Rubycon ZLH 35V 470uF capacitor
  • Dupont 2.54 pins (Board is shipped unsoldered)
  • Mer info på Engelsk
    Flere så også på