Produktinformasjon
iFlight SucceX-A F4 AIO med kraftig 4x40A ESC som kan kjøres på 2-6S LiPo. PNP med DJI HD FPV-system med medfølgende kabel. FCen benytter USB-C og ikke mikro-USB.
Som et kompromiss for at den er PNP med DJI FPV-systemet har den ikke mulighet for analog OSD. Den kan dog kjøre med Betaflight OSD i DJI HD FPV-systemet (Betaflight OSD pass-through).
FC - SpesifikasjonerMCU | 168MHz STM32F405 |
Vekt | 11.4gram |
Gyro | MPU6000 |
Blackbox | 8Mb innebygget |
Uart | 5stk |
DJI Air Unit-port | 8 pin (10V/GND/T1/ R1/GND/R2I/T2/5V) |
Monteringshull | 30.5mm @4mm |
Dimensjoner | 43x39mm |
ESC - SpesifikasjonerMCU | STM32F051 |
Kondensator | 484uF/50V |
Currentsensor | Ja |
Inn-spenning | 2-6s |
BlHeli32 | Ja |
Kompatibilitet | Dshot1200, Proshot, Oneshot, Multishot |
MedfølgerSucceX-A F4 AIO × 1Capacitor 470uF/50V × 1XT60 12AWG cableWire harness (plug&play) for DJI Air Unit × 1M4 to M3 silicon grommets × 4
Product details in english
The SucceX-A F4 AIO(F4+40A) NEXT-GEN flight controller you need for your build. This FC is ready for anything with 5 uarts,4 motor outputs, 8Mb blackbox and a powerful F4 processor to run it all. Designed to work seamlessly with DJI?s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the AIO FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.
Attention: This AIO-Board was specifically designed to run with a DJI Air Unit and takes advantage of DJI?s latest Betaflight OSD pass-through! Because of space limitations we needed to take compromises and removed analog OSD support for this board! If you need analog OSD functionality, please check our latest releases.
Top Features:
DJI Plug-and-Play - No need to solder tiny wires!Gyro Fusion - Zero delay Twin-Gyro filtering!Dual BEC 5V and 10V
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!