Spektrum DX6e er en radio med mange muligeter. Med fire modellmuligheter passer denne til det du måtte ha, være seg fly, heli, seilfly eller drone(multikopter). På hver modell har man flere oppsettmuligheter, som dual rates, expo og throttle-kurve for å nevne noe. Radioen kommer her uten mottaker, og er kompatibel med Spektrum DSMX-mottakere.
DX6e kan brukes med trådløs trainer link som gir din instukør mulighet til å koble seg til din radio med trådløs forbindelse. Innebygget telemetri lar deg sjekke spenningen, signalkvalitet, motortemp med mer.
Product details in english
The DX6e gives you more than you ever thought possible from a 6-channel radio under $200. Four model types, 250-model memory, wireless trainer link - you get it all and more. You can even share model setups with users of other Spektrum transmitters.
Key Features
Patent-pending gimbal design with spring configuration switchDSMX Wireless trainer linkVirtually unlimited model memory-transmitter stores up to 250 models and only populates the model list with models the user has configuredAirplane, Helicopter, Sailplane and Multirotor programmingBuilt-In Telemetry7 airplane wing types and 6 tail types2 swashplate types4 sailplane wing types and 3 tail typesMultirotor flight mode setup7-point throttle curves for airplanes and helicopters7-point pitch and tail curves for helicoptersCross-platform model sharing with other Spektrum transmitters4 AA batteries includedEN328 compatible
Overview
Being on a budget doesn´t have to mean you have to settle for less than the best. The Spektrum DX6e gives you the unbeatable response of DSMX® technology, the simplicity of Spektrum AirWare programming software and many other features you can´t find on other "budget" radios.
Airplane, Helicopter, Sailplane and Multirotor Programming
The DX6e comes equipped with the programming you need to fly almost anything. And because it´s based on the same Spektrum AirWare software used in most other Spektrum transmitters, you can share model setups with just about any Spektrum user you meet.
AIRPLANE PROGRAMMING
7 Wing Types: Normal, Dual Aileron, Flaperon, 1 Aileron 1 Flap, 2 Aileron 1 flap, Elevon A, Elevon B6 Tail Types: Normal, V-Tail A, V-tail B, Dual Elevator, Dual Rudder, Dual Rudder/ElevatorFlap System with Elevator Compensation3 Flight ModesDual Rates and Expo7-Point Throttle Curve3 Preset Mixes: Rudder-to-Aileron/Elevon, Aileron-to-Rudder, Elevator-to-Rudder4 Programmable Mixes - Normal or Curve
HELICOPTER PROGRAMMING
Gyro7-Point Throttle Curve7-Point Pitch Curve7-Point Tail Curve2 Swash Plate Types: Normal, 3-Servo 1203 Flight Modes + Throttle HoldDual Rates and ExpoCyclic-to-Throttle and Swashplate Timing Mixes4 Programmable Mixes - Normal or Curve
SAILPLANE PROGRAMMING
4 Wing Types: Single Aileron, Dual Aileron, 2 Aileron 1 Flap, 2 Aileron 2 Flap3 Tail Types: Normal, V-Tail A, V-Tail BCamber SystemCamber Preset5 Flight ModesDual Rates and ExpoDual Rates and Expo4 Preset Mixes: Aileron-to-Rudder, Aileron-to-Flap, Elevator-to-Flap, Flap-to-Elevator4 Programmable Mixes - Normal or Curve
MULTIROTOR PROGRAMMING
Multirotor Channel Inputs - ALT (Altitude), ROL (Roll), PIT (Pitch), YAWMultirotor Checklists and WarningsSimplified Multirotor Flight Mode Setup and Switch Assignment
250-Model Memory
The enormous capacity of the DX6e´s on-board memory means you will rarely, if ever, need to juggle models between transmitter memory and your SD card. The model memory menu is easy to navigate too. Only memory slots with model settings saved to them will appear. You wont have to scroll through empty slots or move models around if one is deleted.
Built-In Telemetry
The built-in telemetry feature can give you real-time information on things like battery voltage, signal quality, motor temperature and more.* You can also program alerts that let you know when specific telemetry values reach or exceed limits you define.
*Requires telemetry sensors and a telemetry-enabled receiver.
Wireless Trainer Link
The wireless trainer link gives instructors the option to wirelessly buddy box with another DSMX transmitter. Once bound to another transmitter, ModelMatch technology will allow the DX6e to re-link without having to go through the bind process again.
Patent-Pending Gimbal Design with Spring Configuration Switch
The DX6e´s patent-pending gimbal design lets you change gimbal spring configurations simply by moving a slider switch on the back of the transmitter. No tools are required. Just select the spring configuration that matches the mode you are using and model type you are flying. That´s it.
There are four spring configurations to choose from:
Normal Throttle for Modes 2 and 4 (Air, Heli and Sailplane Model Types)Spring-Centered Throttle for Modes 2 and 4 (Multirotor Model Type)Spring-Centered Throttle for Modes 1 and 3 (Multirotor Model Type)Normal Throttle for Modes 1 and 3 (Air, Heli and Sailplane Model Types)The slider switch is protected by a hinged cover that prevents you from accidentally changing spring configurations in flight.
Mer info på Engelsk