Produktinformasjon
Vert Racer 5" er en innovativ Racingramme fra Hyperlow med en vekt på 82g
Ved hjelp av doble 5mm armer har rammen en meget solid armstruktur hvor du raskt og enkelt kan bytte ut en arm. Du kan velge å bygge med stakkhøyde på 15 eller 10 mm.
Inkludert i pakken
Hyperlow Vert Racer3 batteristrapsBatteri og antenne-festeKamerafeste (mikrokamera)Antennerør Monteringstilbeh¢r
Product details in english
This Hyperlow mid-mount racing frame features a new approach to arm design developed by Bob Roogi (Hyperlite/Floss); a double stack assembly with all the benefits of a vertical arm, and none of the drawbacks.
At 10mm tall and 4.5mm wide, the arms allow for the motor mount to be cut from the layer, with the bottom layer adding extremely rigid support and the benefit of aerodynamic positioning. The arms then double as standoffs, with the kit only needing a total of two for camera mounting.
Mid-mount battery positioning helps gives the frame fluid maneuverability, while a double strap plate and adequate prop berth can house up to a 1600 (Who Cares:) lipo safely.
Component requirements for this frame is a micro or mini FPV camera, and naked bottom motors (although some full bottom motors will fit around the arm bolt eg. Emax 2306.)
Mid-Mount
Lowering the battery all the way into the prop plane gives the most neutral control possible. Motors do not have to work as hard to balance a higher CG, making for more fluid control and much smoother transitions. Fast acro maneuvers are effortless, and the acceptable tuning window is greatly increased. Feels just like a sim. -Less bolts and no more M2 bolts. ALL M3
Key Features:
Mid-mount 5" racing frameVertical amsStretched X10mm + 15mm hardwareDouble strap plate3 Battery strapsBattery and antenna padsPressnut assemblyOffset rear prop planeMicro cam only - mounts included
Kit Parts List
Carbon:1 x 2mm top plate1 x 2mm bottom plate1 x 2mm camera bumper4 x 5mm arm spacers (for 15mm build)4 x 5mm arms4 x 5mm arm brace
Hardware2 front 10mm standoffs18mm bolts x 8 for arm attachment14mm bolts x 4 for arm to brace attachmentM3 locknuts x 128mm bolts x 2 for front camera bumper6mm bolts x 6 for front top plate and FC standoffsNylon FC standoffs x 4Nylon FC nuts x 6 (two as camera bumper standoffs)Landing pads for under main body. TPU camera mounts for Micro cam
New AdditionsTPU Camera CoverBattery and antenna pad3 x 250mm Hyperlow battery straps15mm hardware2 x 15mm standoffs4 x carbon spacers8 x button heads.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!