HjemUtgåtte varer(slettet)
Print produktark

Align T-Rex 450S CF

Produsent Align
Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Deler
Tips en venn
Anmeldelser

Produktinformasjon

Align T-Rex 450S CF KIT CCPM KX015045T
Delvis sammensatt byggesett fra Align, nå med 3550KV motor og 35A regulator som standard. Denne nye modellen av T-Rex flyr meget godt og har godt kraftoverskudd til 3d flyving og sportsflyving. Helikopteret har metall rotorhub, karbonramme, karbonrotorblader og karbon skråstilt batterifeste. Det følger med verktøy og locktite samt manual, rotorhodet er delvis sammensatt og selve monteringen av helikpoteret går relativt fort. Dersom du ikke har noe utstyr fra før anbefaler vi en av de komplette pakkene. For å fly trengs det 4 mikroservoer, gyro, batteri, lader, radio og mottaker.

Informasjon fra produsent på engelsk:
T-REX 450S CF(eCCPM) helicopter is great for 3D flight and wind resistance, the main frames are made by high strength carbon fiber and light aluminum alloy material, suitable for 3D Acrobatics and beginners.
  • This kit is for the flyers who want uncompromised performance and quality. This SE arrived with 80% pre-assembled!
  • 1mm CNC carbon fiber main frames features the rigidity and great for 3D flight.
  • 3K carbon fiber battery mounting plate is fixed to aluminum alloy mounting plate mount for connecting to main frames. Set the battery here and make the center of gravity close to the rotor blade sides for reducing the trim when the heli rolling.
  • CNC Main rotor housing is made by hard aluminum alloy material.
  • Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
  • New streamlined carbon tail rotor blades makes the gyro more efficient.
  • New design for Tail pitch assembly, upgrade to ball control slider bushing with dual bearing, add collars to ball links for reducing the gaps, maks the change of pitch travel more smooth.
  • Using new design on tail rudder control rod and control guide for smooth control, the design is same as TREX 600.
  • Providing flybar weight- When normal flying, you can add the weights on flybar paddles for stable flight. When aerobatic flying, you don?t need to add the weight, but you can see the flexibility of 3D actions.
  • New gear ratio(4.24:1), suitable for the motor with higher KV, provide more safty.
  • Using super strength drive belt and tail drive gear, features wear resistant to reduce power loss.
  • All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
  • Tail rotor hub made of stainless steel, very rigid.
  • Use 33pcs precision bearing.
  • Great stable and sensitive mixing lever design! Can disply the great stability and precision for 3D flight.
  • Special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter!
  • Features
  • .33 Precision Bearings
  • .Auto-Rotation System
  • .Rear Tail Servo Mount
  • .Collective Pitch System
  • .Tail Rotor Drive Belt System
  • .Main Drive Gear with Cooling Fan
  • Length:650mm(25.6 in)
  • Height:228mm(9.0 in)
  • Main Blade Length:325mm
  • Main Rotor Diameter:700mm(27.6 in)
  • Tail Rotor Diameter:150mm(5.9 in)
  • Motor Pinion Gear:12T/13T
  • Main Drive Gear:150T
  • Autorotation Tail Drive Gear:106T
  • Tail Drive Gear:25T
  • Drive Gear Ratio:1:12.5:4.24/1:11.5:4.24
  • Weight(w/o main blade):380g(0.84 lbs)
  • Flying Weight:Approx 650~680g(1.43~1.50 lbs)
    • Flere så også på



    100% norsk nettbutikk
    Om oss

    Lynrask levering
    Les mer

    60 dager bytterett
    Gå til bytte & retur

    Kundeomtale på prisjakt
    Les våre omtaler