Produktinformasjon
Her har vi satt sammen en pakke med B6 pro 50W lader, og strømforsyning for 220V. Denne kombinasjonen gjør at man kan bruke laderen ute i felten på 12V, f.eks bilbatteri, og hjemme med strømforsyningen i stikkontakten i veggen.
Info om laderen:
God 12V balanseringslader som kan lade LiPo, LiFe, LiIon, NiHm, NiCd og Pb batterier. Laderen trenger 12V kilde inn, som f.eks ett bilbatteri eller ett powersupply ( følger med i denne pakken ). Laderen har max ladestyrke på 50W, så ett 3cell LiPo kan da lades på ca 4,5A. Max ladestyrke er 5A med begrensning på 50watt.
Det følger med ladeledninger for Deans, JST, servo-plugg og krokodilleklemmer. Det følger med ett balanseringsbrett for 2-6S batterier med XH balanseringsplugg. Skal man balansere LiPo-batterier mad annen type balanseringsplugg trenger man iMax balanseringsbrett, alternativt Hyperion harness og balanseringsbrett. Se lenger ned for tilbehør.
Features
imaxRC B6 Pro multi-functional balance charge is a rapid charger with a high performance MCU.Optimized user interfaceWhen charging or discharging, B6 Pro has an ?AUTO? function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging that can lead to an explosion by user?s fault. Every program in the unit is controlled with mutual links and communication for every possible error for maximum safety. These can be set at user?s option.Special recharge plugs port for receiver, transmitter and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc.It provides most convenient balance port for Lithium batteries, with separated 2,3,4,5,6 charge port, and external reverse connector.
High-power and high-performance circuitB6 Pro employs the circuit that has maximum output power of 50W. As a result it can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 5.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program.
Individual voltage balance for Lithium batteries insideB6 Pro has an individual-cell-voltage balancer inside. This does not require any extra balancer when charging Lithium batteries (Lilo/LiPo/LiFe) for cell voltage balancing.
Balance individual cells on dischargeB6 Pro also can monitor and balance individual cells of the Lithium battery pack during the discharge progress. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
Suitable for various types of Lithium batteriesB6 Pro can accept three types of Lithium batteries-Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer ?Warnings and safety notes? section.
Lithium battery ?Fast? and ?Storage? modeYou can charge Lithium battery for special purposes. ?Fast? charge reduces the charging time of Lithium battery and ?Storage? mode controls the final voltage of the battery to be suit for long time storage.
Maximum safetyDelta-peak sensitivity: the automatic charge termination program works on the principle of the Delta-peak voltage detection.Auto-charge current linit: when charging Nicd or NiMH at ?AUTO? current mode, you can set the upper limit of charge current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in ?AUTO? mode.Capacity limit: the charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.Temperature limit: the temperature of the battery on charging will rise by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has reached.Processing time limit: you can also restrain the maximum process time to prevent from any possible defect.Input power monitor: to protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.
Data store/loadFor users convenience it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
Cyclic charging/dischargingPerform 1 to 5 of charge/discharge or discharge/charge continually for battery refreshing and balancing. PC based analysis using USB communicationFor technical expert, B6 Pro offers PC based program can analysis the characteristic of the battery by USB adaptor. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.(*PC analysis software and USB adaptor, link wire are not included, sold separately.)
Multi-use wiresFive kinds of wires are provided with the B6 charger. You can charge and discharge your battery easily with these wires.
B6 Pro Specification:Input voltage: DC 11V-18V or AC TO DC adaptor(AC110/240 to DC 15V/5A)Charge current:0.1-5A,0.1A stepDischarge current:0.1-1A,0.1A stepNicd/NiMH Cells:1-15CellLi-Ion/Li-Po/Li-Fe Cells:1-6CellLead-acid(Pb):2-20VTemperature sensor & USB enable Balance:2-6Cell Case: plasticDisplay: 16*2 character LCD
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!