Produktinformasjon
Zepsus har her designet en magnetisk bryter for modeller som bruker to batterier, flott til glidere og jetmodeller. Her vil du kunne bruke 3s på den ene og 2s på den andre inngangen om ønskelig, designet for bruk med mottaker og ECU, skalalys eller røyksystemer.
Av/På funksjonHer kan du enkelt skru på modellen din ved å plassere magneten mot markert område på bryter. Bryteren monteres inni kroppen vekk fra luftmotstand.
FailsafeDenne dobble switchen har innebygd failsafe funksjon. Denne vil huske de siste 10+ sekundene om batteriene ikke lenger har kontakt. Her vil også switchen beskyttes mot power glitch om du skal ha dårlig batterikontakt.
Stand-by forbrukSwitchen bruker meget lite strøm når den er skrudd av, men enda tilkoblet batterier. Forbruket er så lavt at man i teorien kan koble bryteren mot et lite batteri i flere år uten at det lader discharger seg selv!
Tekniske data| Innspenning | 4-13V |
| Dropout spenning | 39mV / 20A |
| Konstant | 20A |
| Burst | 40A |
| Stand-by spenning | 5 micro-ampere |
| Batterikontakter | XT30 |
| Dimensjoner | 46 x 48 x 8mm |
| Brukstemperatur | -40C til +85C |
Product details in english
Double Magnetic Switch 20A
2 switches in one.
Introduction
Designed for RC jet planes and other double battery models. It?s designed with 2 switches which are activated from one single point. Instead of turning on the ECU in one place and receiver in another. All is located in one place with the Double Magnetic Switch. The batteries are separate so it is possible to use 3s on one switch and 2s on the other switch. It can be used as mentioned before for receiver and ECU. But also as a switch for a dual battery power unit, receiver and scale light or receiver and smoke unit etc.
On/Off Function
A clean and easy way to turn on your model, just slide the magnet across the marked area. The switch is mounted inside of the fuselage, out of the air stream, and the magnet will easily activate the switch from outside. No more fumbling for little switches, or plugging in connectors.
Failsafe
This produckt has a built-in failsafe function. It remembers its state for at least 10 sec, if disconnect from the battery. It will protects the switch against power glitch caused by bad battery connection etc.
Stand-by Consumption
The switch has an ultra low stand-by consumption in off-state. The consumption is so low that the switch can be connected to a small battery for several years without discharging it.
Technical Data
Input voltage range: 4v~13vUltra low dropout voltage: 39mV @ 20AOutput current constant: 20A @ +25C ambient temperatureOutput current burst: >40AUltra low stand-by current: 5µA (micro-ampere)Connectors: XT30Dimensions: 46 x 48 x 8 mm / 1.81 x 1.88 x 0.31 inWeight: 12.7 grams / 0.44 ozOperational temperature range: -40C to +85C
Production test
All switches have been tested with 30A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is made.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!