Produktinformasjon
Dronen fremstår som ny men kommer uten Flightcontroller og ESC. Dette er en fin mulighet for deg som har en ekstra FC/ESC combo liggende.
Se bilder av dronen her: https://photos.app.goo.gl/r8skDHKm7kfkfawu7
iFlight Nazgul med Caddx Vista HD-system i 6S-versjon med 1800KV-motorer. Dronen kommer ferdigbygget og kun antenne og propeller må monteres, eventuelt også mottaker om DJI Remote Controller ikke skal benyttes. CaddX-uniten og stack er plassert sentrert i dronen for optimalisert vektfordeling.
For å fly denne versjonen trengs batteri, radio og DJI FPV Goggle. Av radio kan både DJI Remote Controller, da trengs ingen ekstra mottaker, og andre merker som FrSky og Spektrum velges med ekstra mottaker montert. Se anbefalt tilbehør.
Gopro og gopro-mount som vises på noen av bildene følger ikke med, må kjøpes i tillegg.
Inkludert i pakken:Nazgul XL5 V2 rammeCaddx Vista-systemAntenneholder og antenne2xTPU kamera soft mount2x iFlight batteristropp2x Nazgul 5140-Propeller (sett á 4)4x XING-E 2207 motorerSucceX-E StackNødvendig tilbehør:Batteri 6S ~1250mAhDJI HD FPV GogglesDJI Remote Controller (Mode 2) eller annen 6+-kanals radioMottaker for alternativ radioLader| Spesifikasjoner | |
| Wheelbase | 240mm |
| Vekt | 400,8g uten batteri |
Product details in english
PRODUCT DESCRIPTION
Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Dont worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!
HIGHLIGHTS:
- 5mm arm design for more durability
- Easy-Swap arms
- LED illuminated Logo
- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks
XL5 V5 frame specs:
SucceX-E F4 45A flight stack
XING-E 2207 FPV Motor ?6S 1800kv / 4S 2750kv)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 400.8g (without battery)
FACTORY SETUP and WIRING DIAGRAM:
This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.
Reflashed your drone but didnt backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK
Nazgul5 HD Quad BNF Included Components and Parts
Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x Caddx Vista Digital HD System Kit
1x Albatross LHCP RP-SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
FC // SucceX-E F4 Flight controller
- MCU?STM32F405
- Gyro?MPU6000
- Betaflight OSD?YES
- Blackbox?8MB
- 4X Uarts?1 2 3 6 )
- 8 x Dshot/Proshot/Oneshot output
- 8 x individual ESC power/ signal pads
- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
- VTX telemetry: YES
- WS2812 led Strip?YES
- Baro?No
- Beeper?YES
- Input?2-6S?Max 8S?
- BEC?5V/2.5A cont
- Firmware target : BETAFLIGHTF4
- Mounting?30.5*30.5mm??4mm with Grommets ?3mm
- Dimensions?36*36mm
- Weight?7.6g
ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
- Dimension: 40*43mm
- Mounting Holes: 30.5*30.5mm/?3mm
- Weight: 14.4g
- Supports 2-6S Lipo input
- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
- Current sensor: YES
- BEC: NO
- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
- Target: G-H-30 BLS 16.7
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!