Vertikal take off og landing
Stabiliserings teknologi
Klar til å fly i løpet av minutter etter at esken er åpnet
E-Flite X-Vert VTOL(vertikal take off og landing) er en flyvende vinge på 504mm. Modellen leveres komplett med DXe radio batteri og lader. Det er tre flymoduser på X-Vert: Multirotor, Stabilitet og Acro. Multirotor brukes til vertikale takeoffs og landinger. Som navnet antyder, oppfører X-Vert seg som en multirotor drone med denne innstillingen. Den eneste forskjellen er at i motsetning til tradisjonelle droner, har X-Vert bare to motorer og flytter rorflatene for kontroll. For piloten blir det akkurat som å fly en vanlig drone. Stabilitet og Acro modus får modellen til å oppføre seg som et fly. Det er imidlertid pitch- og bankgrenser som forhindrer aerobatics i Stabilitet modus. For å bytte mellom Mulitrotor og Stabilitet flipper piloten en bryte og X-vert tar seg av resten.
X-Vert vil også self-level i stabilitetsmodus. Bare slipp høyre stikke og modellen stabiliserer seg automatisk. Automatiseringen fra denne innstillingen forenkler overgangen fra Multirotor til Acro-modus eller omvendt. Alle tre modus bruker AS3X stabilitet. Poenget med AS3X er å dempe effektene av flyving i vindfulle eller turbulente forhold. Det er spesielt nyttig på små, lette modeller som X-Vert siden de er mer påvirket av vindforhold enn større modeller. AS3X flyr ikke modellen for deg men gjør flyvingen jevnere.
Spesifikasjoner| Vingespenn | 504 mm |
| Vekt | 182 - 200 g |
| Lengde | 264 mm |
| Motor | 280 Brushless Outrunner 2600Kv |
| Propell | 125 x 75 mm CW og CCW |
Product details in english
Key Features
Multirotor versatility and sport plane agility Takes off and lands vertically in small areas Fly slow or fast and perform aerobatics in airplane mode Can be hand launched and belly-landed like a conventional wing Simple tail-sitter design and SAFE technology makes VTOL flying easy Stability and Acro modes that provide a wide range of flight performance Accepts the patent-pending, servo-driven FPV camera mount (sold separately) 280-size brushless motors compatible with 2S 450-800mAh LiPo batteries Outstanding speed and climb performance Lightweight and extremely durable EPO airframe Colorful decal sheet with multiple trim scheme options Ready to fly within minutes of opening the box Propeller guards and vertical fins that are easy to install or remove Includes a pre-programmed Spektrum DXe transmitter - no setup required Includes a 2S 7.4V 800mAh LiPo battery, DC balancing charger and AC adapter
Whats in the box?
(1) X-VERT VTOL Airplane (1) Spektrum? DXe DSMX® 2.4GHz Transmitter (1) 3-in-1 Receiver/ESC/Flight Controller Unit (2) BL280 2600Kv Brushless Outrunner Motor (1) 2S 7.4V 800mAh LiPo Flight Battery (1) DC LiPo Balancing Charger with AC Adapter (4) AA Batteries for the Transmitter (4) Decal Sheets (1) User Manual
Overview
The X-VERT® VTOL gives you all the fun and versatility of a Vertical Take Off and Landing aircraft without the need for complex mechanics or fancy programming. It also makes the transition between multirotor and airplane flight as easy as flipping a switch. You can take the X-VERT flight experience to a whole different level by adding the patent-pending, servo-driven FPV camera mount that automatically transitions your FPV camera whenever the X-VERT is switched between the airplane and multirotor flight modes (FPV components sold separately).
Sleek and Simple Design
A lot of VTOL aircraft require complex mechanisms like tilting wings and motors to achieve vertical and forward flight. The X-VERT park flyers simple, tail-sitter design and SAFE® stabilization technology allow it to fly like an airplane or a multirotor using nothing more than differential thrust and its elevons. The simplicity of this design also makes the lightweight, EPO airframe remarkably durable.
Wide, Pilot-Friendly Flight Envelope
The light wing loading and efficient aerodynamics inherent in the aircrafts design play a big role in making it easy to fly, especially in airplane mode. Fast or slow, pilots will enjoy smooth, predictable response at any speed.
SAFE® Flight Control Software Makes it Easy
At the heart of it all is exclusive SAFE (Sensor Assisted Flight Envelope) flight control software that has been expertly tuned so almost any RC pilot can experience the fun of VTOL flight.
3 Flight Modes
The advanced flight control software features three flight modes that, along with the models light wing loading and efficient aerodynamics, give you a wide range of performance.
- Multirotor Stability Mode
This mode allows you to take off and land vertically like a multirotor aircraft. Its also great for indoor flight. In this mode the aircrafts tail remains pointed at the ground while the flight controller uses a combination of differential thrust and elevons to control pitch, bank and rotation. Pitch and bank angles are limited, and SAFE technology will work to keep the model in a stable hover whenever you release the sticks.
- Airplane Stability Mode
In this mode the aircraft responds to pitch, roll and yaw commands like a typical airplane. SAFE technology limits pitch and bank angles so new pilots can experience airplane flight without accidentally rolling upside down or losing control. It will also return the wings to level whenever the sticks are released.
- Airplane Acro Mode with AS3X® Technology
In Airplane Acro Mode the model becomes an agile, fully aerobatic flying wing. There are no angle limits or self-leveling. The large, long-throw elevons will allow you to perform incredibly tight turns as well as a wide range of aggressive aerobatic maneuvers. And because you have the forward thrust of two brushless motors working for you, there is plenty of speed and power to spare. You can even use the differential thrust of the motors for yaw control to perform wild spinning and tumbling maneuvers.
Mer info på Engelsk