Print produktark

FlightOne Spark32 4in1 ESC BlHeli_32 4x50A

Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Anbefalt tilbehør
Tips en venn
Anmeldelser

Produktinformasjon

FlightOne Spark32 4in1 er en fartsregulator for FPV-racere med 3"-5" propeller. Regulatoren har 4 utganger på 50A hver. Regulatoren har 20mm monteringshull og er klar for BlHeli_32.

Anbefalt tilbehør

    Spesifikasjoner
  • 2-6S kompatibel
  • 20mm monteringshull-avtand
  • Tåler 50A kontinuerlig strømtrekk pr motor
  • BlHeli32
  • Innebygget strømsensor
Product details in english
Four ESCs Built Into One
The FlightOne Spark32 4in1 electronic speed controller (ESC) provides the power of BlHeli_32 performance in a tiny package. This makes your electronic stack small, and eliminates the need for an additional PDB. The Spark32 4n1 ESC performs great, helps clean up any build, and is perfect for your 5" light weight builds for maximum power.

Specifications
  • weight: 7.1 grams
  • 20 mm x 20 mm mounting hole spacing
  • 50 Amps per channel
  • BlHeli32
  • D-Shot ready
  • 2s - 6s compatible
  • Connects directly to the MillivoltOSD
  • Voltage sent to flight controller and mah consumption
  • Easy Install
  • High quality components
  • Mer info på Engelsk

    Anbefalt tilbehør

    Panasonic FR 35V 1000uF Low ESR Capacitor
    3|73|1246
    kr 15,-

    Produktanmeldelser

    Stay away
    Bruker ga kun karakter
    27.08.2019 av Tormod
    I´m saddened to say that FlightOne has provided me with the by far worst experience I have ever had in FPV Drones. I purchased an expensive and "beginner friendly" ECS+FC combo that I now after 5 months have given up completely. Why? Because these products (Millivolt OSD and Spark32 ESC) have NO documentation what so ever, meaning you are left entirely with a pinout diagram and two youtube videos that only answer a fraction of the questions. It doesn´t help that the pinout diagrams comes in different, conflicting versions (with no way to figure out which one is correct), and that the boards themselves oppose industry conventions regarding labelling of RX/TX pins (they are reversed). On top of that, the complete lack of documentation means you will have to find out what ports conflict with one another by trial and error; want BOTH super-duper features active at the same time? Then you need a very specific non-documented configuration for that - and you won´t find it on your own. The advertised support IS very good. Unfortunately it doesn´t nearly make up for the completely lack of tutorials and documentation one take for granted elsewhere. If this experience had come from a cheap China clone board I would have blamed myself for doing a bad purchase. Seeing it from a premium product is just a shame - one markedet as "easy" to set up even. I sincerely hope FlightOne manages to clean up these issues in the future, but as of right now my only advice is to STAY AWAY.
    Dette hjalp meg
    Viser 1 / 1 tilbakemeldinger
    Gi din tilbakemelding

    Flere så også på