Produktinformasjon
Pilot-RC leverer her en Yak 55M i karbonutgave. Modellen er spantebygget balsa og finer, trukket i original Oracover (Profilm), den har høy grad av ferdigstillelse og det går fort å montere modellen sammen. Yak 55 kan brukes til både IMAC og 3D flyving. Modellen trenger trenger to servoer på hvert balanseror og mange setter også to servoer på sideroret. Det skal en servo pr høyderorsflate og i tillegg servo til gass/choke.
Modellen leveres uten elektronikk og motor.
| Modell | Yak 55M Modified - 31% |
| Vingespenn | 2240mm |
| Lengde | 2030mm |
| Vingeareal | 9960m2 |
| Vekt | 8,2kg |
| Motor | 50-60cc |
OBS! Modellen er for stor for vanlig postsending. Kontakt oss for fraktkostnader.
Product details in english
A few years ago the Yak 55M hit the stage big style in Rc. Being a massively precise model, with some of the most axial rolls we have ever seen. Pilot-RC always striving to go above and beyond in every aspect of our designs, have produced our own version of the Yak55M.
Even more precise than the standard version, but much more agile with truly oversized control surfaces brings the agility that we all look for an a thoroughbread acrobatic model such as this one. Try it for yourself and you will see what we mean?
Specifications| Model: | Yak 55M Modified - 31% |
| Wingspan: | 88" (2.240mm) |
| Length: | 79" (2.030mm) |
| Wing area: | 1,543 "2 (9,960 cm2) |
| Weight: | 18,05lbs (8.2kg) |
FeaturesStrong yet light weight design, specially developed for precision acrobatic and extreme 3D flyingSpecially designed wing with oversized aileronsGenuine German Oracover (Ultracote) covering and printed colour schemesHighly prefabricated, experienced builders can have air ready in under a dayPre-installed hinges (glued and pinned)Internally mounted cowling - so no external screws exposedLarge cowl with pre-cut air outletsFuselage tunnel to accept cannister installation easilyRemovable rudder (as well as removable wings and stabs)Laser engraved motor mounting position and multiple servo locations available for Rudder setup (pull pull or direct push pull)Included hardwareComplete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)Pre-installed hinges and pre-mounted canopyFuel tank and fuel tubing pre-prepared, fuel dot and breather valveWheels, axels and wheel pantsPre-preared pull-pull wires and pushrods with ball linksMatching carbon spinnerRequired hardwareMotor: 50-60ccServos: 5 high torque (minimum 20kg) plus throttle // Uses x1 per aileron, x1 per elevator and x1 on rudderAlso requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!