Produktinformasjon
E-flite har her skapt en allsidig og fin modell. Raskt som en jager, men med mulighet til å hovre, starte, og lande som en helikopter/drone. Mye arbeid er lagt i å skape en god automatisk overgang mellom hovring, hurtig flyving, og tilbake til hover. Alt dette ligger i modellens flight controller. Denne er forhåndsprogrammert og innstillingen du må gjøre i senderen er veldig enkle.
Anbefalt tilbehør
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 165,-
0| 0,-
Uten din rabatt kr 165,-
3|564|523
PS! Produkt kan avvike fra video.
Les merKlippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.
OK
Denne utgaven leveres som PNP hvilket betyr at du trenger en radio med 6+ kanaler og mottaker til denne, samt batteri og lader (se punktliste).
Nødvendig tilbehørRadio og mottaker2200-3000mAh 3s LiPo batteriLiPo laderSpesifikasjoner| Vingespenn | 650mm |
| Lengde | 680mm |
| Vekt | ca 771g |
| Materiale | Foam og karbon |
| Motor | 2210-1450KV hovedmotorer og 2730-1550KV halemotor |
OBS!Batteri som ligger under anbefalt tilbehør kommer med Deans kontakt, det er nødvendig med en overgang for at batteriet skal passe i flyet.
Product details in english
Key Features
Multirotor versatility and sport plane agilityDesigned by champion pilot, Mike McConvilleExclusive flight control software makes it incredibly easy to flyStability and Acro Modes provide a wide performance envelopePowerful brushless motors for outstanding speed and climb performanceSuper-simple transmitter setup - no complex programming requiredFPV-ready with camera and video transmitter mounting stationsDurable Z-foam material
VTOL (Vertical Takeoff and Landing) RC models are usually a mixed bag when it comes to performance. If they are stable, their speed and agility is often lackluster. If they are nimble, pilots have to work harder to transition between hovering and airplane flight. The Convergence VTOL park flyer changes all that. Its unique design and exclusive flight control software give you the best of both agility and stability while making the transition between multirotor and airplane flight so smooth and predictable, you will feel right at home your first time on the sticks.
Sleek and Simple
Unlike complex VTOL aircraft that rotate the entire wing and require as many as four motors to achieve vertical and forward flight, the Convergence park flyer uses a simple, yet sleek, delta-wing design with three brushless motors - two rotating motors on the wing and a fixed-position motor in the tail.
In multirotor flight the wing-mounted motors rotate up into the vertical position to provide lift and flight control along with the motor in the tail. In airplane flight, the wing-mounted motors rotate down into the horizontal position and the models elevons take over pitch and bank control. Yaw control in airplane flight is provided by differential thrust from the wing-mounted motors.
Exclusive Flight Control Software Makes it Easy
At the heart of it all is flight control software that has been expertly tuned by designer, Mike McConville, so almost any RC pilot can experience the fun of VTOL flight.
Automated Transition
Making the transition between multirotor and airplane flight is as simple as flipping a switch. The flight controller will smoothly rotate the two wing-mounted motors into the correct flight attitude and activate the rear motor as needed.
Stability and Acro Flight Modes
These two flight modes give you a wide range of performance for every phase of flight.
Stability Mode:In multirotor flight, Stability Mode will limit pitch and bank angles and work to keep the model level when you release the sticks. This allows you to take off and land like a pro, even if youve never flown a multirotor before. In airplane flight, it will limit pitch and bank angles and automatically return the wings to level when the sticks are released.Stability Mode automatically engages during the transition between multirotor and airplane flight. It seamlessly maintains self-leveling and angle limits from one phase of flight to the other, making this the easiest RC VTOL experience you will find anywhere.
Acro Mode:In Acro Mode there are no angle limits or self-leveling in any phase of flight. During multirotor flight, the model will behave like a conventional multirotor that pitches and banks in whatever direction you want it to fly. It can flip and roll like other multirotors, too.In airplane flight, Acro Mode lets you perform a wide range of aerobatic maneuvers. And because you have the forward thrust of two brushless motors working for you, there is plenty of speed and power to spare. You can even use the differential thrust of the motors to perform unique spinning and tumbling maneuvers.
FPV Ready
The model is designed to accommodate several of the most popular FPV camera systems. There is a camera bay under the nose and a place to mount the video transmitter in the rear of the aircraft. Both locations are easy to access so installation takes just a few minutes.
Recommended FPV System - All Items Sold SeparatelySpektrum 650TVL CCD FPV Camera NTSCSpektrum 25mW 5.8GHz Video TransmitterPower AdapterSpektrum 4.3-Inch Video Monitor with Headset
Super-Simple Transmitter Setup
This Bind-N-Fly version can be flown with any full-range, 6+ channel DSMX/DSM2 aircraft transmitter and comes equipped with a Spektrum serial receiver that is connected to the flight controller. No complex transmitter setup or programming is required. You use your "GEAR" switch for selecting Stability or Acro mode and your "AUX 1" switch to transition between multirotor and airplane flight.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!