Produktinformasjon
Wondrous Drones Yin Yang er en freestyleramme for FPV som tåler mye og som samtidig har meget god balanse. Rammen er designet i Sverige av mr. Leksell og passer til standard elektronikk og motorer med 6" propeller. Diagonalavstanden er 270mm og armene er i 4mm-karbon. Dette er Sunken-utgaven som har ett stort hull midt i rammen, dette er der for å montere en 4i1-esc eller PDB så lavt som mulig.
Spesifikasjoner: - 270mm FPV Carbon Race Drone
- 120 gram ink spacers og skruer
- 4mm karbonarmer
- Lett å bygge
- Passer til 6tommers propeller
- HS1177-type kamera passer direkte i
Product details in english
This is the 6" Sunken version of the Yin Yang freestyle frame
Its the same frame as the 5" but with longe arms.
As the standard version of the Yin Yang this frame has perfect balance. What makes this version stand out is the big hole in the middle of the frame. This hole is made so that you can mount a 4in1 esc or PDB within the bottom of the frame. This helps you build with a very low center of gravity, you only need 10mm spacers to fit the FC, RX and VTX under the battery pack.
The quad is easy to build as you have the option to choose height of your spacers. This is good if you have a stack that is a bit higher. To make it even easier to build the quad you get a carbon rod that you cut off to the length you need, this rod is replacing the spacers normally use behind the FPV camera.
Frame highlights
Very beautiful frame design and cut!
Easy to build with many configuration options.
Possibility to use 3D printed soft mount and FPV camera mount for standard and mini cameras
Free download of 3D printed parts (.STL 3D file) like soft mount, FPV camera mount, go pro mounts and more.
All parts are replaceable as well as the arms.
Possible to use two strapps for the battery pack.
Can be configured with 4in1 esc or esc´s on arms.
Carbon FPV camera mount that is made for both the 1177 and newer cameras like Foxeer monster v2
Weight about 120 grams (about 128 grams with Soft mount and 3D printed FPV mount)
270 mm in diagonal
What´s included
The frame
Standoffs and screws
Build Advice
2306/7 motors or larger with low kv and 6" Props
4in1 +30a ESCs (or ESC on arms)
TBS Crossfire for long range
VTX, large or small will fit, with or without pigtail.
HS1177 Camera or similar + mini cameras.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!