Product details in english
Key Features
Carbon fiber front case
Machined-aluminum, quad-bearing gimbals
Ergonomic leather side grips
ProTrim in-flight adjustment of rates, expo, mixes and differential
20 fully-proportional channels
250-model memory
Includes aluminum dual air transmitter stand up case
Voice alerts
Wireless trainer link
Independent multi-engine control for airplanes
11ms frame rates with capable receivers
Built-in telemetry with vibe or voice alerts
Airplane, helicopter, sailplane and multirotor programming
11 airplane wing types
6 airplane tail types
2 canard options (1 rudder or 2 rudder) with elevon wing types
Active gyro trim
5 airplane and heli flight modes
7 swashplate types
Swashplate timing
7-point airplane and heli throttle curve
7-point heli pitch curve
7-point heli tail curve
5 sailplane wing types
3 sailplane tail types
10 sailplane flight modes
Multirotor flight mode setup, checklists and voice alerts
Throttle start or switch start timer
16 programmable mixes
0.5% mix rate increments
Origin mixing
Flap delay and elevator compensation
Dual rates and expo
Diversity antenna
4000mAh LiPo transmitter battery
Global charging system
X-Plus? technology expandability up to 20 channels
Large, backlit LCD screen
Includes AR9020 9-Channel DSMX receiver
Includes 3 stick end sets
5 menu languages: EN, DE, FR, IT and ES
2048 resolution
Language selectable
Region settings for global compliance
EN328 compatible
Overview
From its premium construction and comfortable ergonomics to its powerful programming features, the DX20 delivers a pro-class flying experience that is second to none. In fact, its the only transmitter in its price range equipped with machined aluminum gimbals.
Powerful AirWare? Software for Expert Pilots
The Spektrum? AirWare? software that comes in the DX20 gives expert pilots all the programming features they could want along with a few they never knew they needed. And its intuitive SimpleScroll? interface makes navigating menus and changing settings as simple as "roll and click."
Multi-Engine Control
The airplane programming includes a multi-engine control option that, when activated, allows you to independently adjust and control up to four engines or motors. You could use it to make individual run-up checks on the ground or synch propeller speeds in flight. It also makes it possible to use asymmetric thrust to tighten the turning radius of large models during ground operations.
ProTrim In-Flight Adjustments
When active, ProTrim will allow you to make small dual rate, expo, mix and differential adjustments in flight.
Programmable Voice Alerts
With voice alerts, you can keep tabs on important functions without ever taking your eyes off what youre flying. They can be programmed to call out what flight mode youve chosen or report telemetry information on demand. If an alarm goes off, you wont have to look at the transmitter display to see whats happening. The DX20 will tell you.
Pro-Class Programming for Sailplanes
In addition to extensive airplane and heli programming, the DX20 has the most impressive sailplane programming features youll find in any handheld transmitter. Ten available flight modes, 5 wing types, 3 tail types, 2 motor types, flap delay with elevator compensation - it has it all. You even have the ability to adjust individual servo characteristics (end points, travel, center, etc.) for all 20 channels.
Built-In Sequencer
Program a sequence of switch-activated events with time delays between each event. For instance, with a flip of the gear switch you could have an auxiliary channel open landing gear doors, then have the retract channel lower the landing gear, followed by the auxiliary channel closing the gear doors after the gear is extended.
Built-In Servo Balancer
No more will you need a complicated network of little boxes littering your fuselage if you want to balance servos. You can precisely balance the output of swashplate servos or multiple servos on a single control surface with the transmitter using a 7-point curve mix.
Wireless Trainer Link
This exclusive Spetkrum technology gives DX20 users the ability to wirelessly link up with other Spektrum transmitters and specially-equipped Spektrum FPV headsets. Once bound to another transmitter or component, ModelMatch? technology will allow the DX20 to re-link without having to go through the bind process again.
With Wireless Trainer Link, you could:
Wirelessly "buddy box" with another DSMX® transmitter when teaching someone to fly.
Assign gimbal functions to a 2nd camera transmitter when flying a camera drone so you can focus on avoiding obstacles and maintaining visual contact while someone else lines up the shot.
Link with specially-equipped Spektrum FPV headsets to wirelessly control head tracking and remotely change video frequencies on the fly.
250-Model Memory
The enormous capacity of the DX20s on-board memory means you will rarely, if ever, need to juggle models between transmitter memory and your SD card. The model memory menu is easier to navigate too. Only memory slots with model settings saved to them will appear. You wont have to scroll through empty slots or move models around if one is deleted.
Because the DX20 uses the same AirWare? software as many other Spektrum transmitters, you can share model setups across platforms with almost any Spektrum pilot.
Stay Up to Date
Register your DX20 and receive alerts whenever Spektrum Airware software updates are available. You also gain access to a growing library pre-set model setups for the most popular Horizon Hobby aircraft.
Programming Features
The DX20 has all the programming functions you need to fly everything from collective pitch helis and multi-rotor aircraft to competition sailplanes and giant-scale jets.
Airplane
11 Wing Types: 1 Aileron, 2 Aileron, Flaperon, 1 Aileron + 1 Flap, 1 Aileron + 2 Flap, 2 Aileron + 1 Flap, 2 Aileron + 2 Flap, Elevon, Elevon B, 4 Aileron, 6 Aileron
6 Tail Types: Normal, V-Tail A, V-Tail B, 2 Elevator, 2 Rudder, 2 Rudder + 2 Elevator
2 Canard Options with Elevon Wing Types: Canard + 1 Rudder, Canard + 2 Rudder
Independent Multi-Engine Control for Up to 4 Engines or Motors
ProTrim In-Flight Adjustment of Rates, Expo, Mixes and Differential
AS3X® Gain Adjustment
Flap Delay and Elevator Compensation
5 Flight Modes
Dual Rates and Expo
0.5% Mix Rate Increments
16 Programmable Mixes
Helicopter
Active Gyro and Governor Trim
7-Point Throttle Curve
7-Point Pitch Curve
7-Point Tail Curve
7 Swash Plate Types: Normal, 3-Servo 120°, 3-Servo 135°, 3-Servo 140°, 3-Servo 90°, 4-Servo 90°, 2-Servo 180°
Swash Plate Timing
ProTrim In-Flight Adjustment of Rates, Expo, Mixes and Differential
5 Flight Modes
Dual Rates and Expo
0.5% Mix Rate Increments
16 Programmable Mixes
Sailplane
5 Wing Types: Single Aileron, Dual Aileron, Dual Aileron + Single Flap, Dual Aileron + Dual Flap, Quad Aileron + Dual Flap
3 Tail Types: Normal, V-Tail A, V-Tail B
Motor Throttle Switch Assignment
Aileron and V-tail Differential
Camber System
Camber Preset
ProTrim In-Flight Adjustment of Rates, Expo, Mixes and Differential
AS3X Gain Adjustment
Flap Delay and Elevator Compensation
10 Flight Modes
Dual Rates and Expo
0.5% Mix Rate Increments
16 Programmable Mixes
Multirotor
Multirotor Channel Inputs - ALT (Altitude), ROL (Roll), PIT (Pitch), YAW
Multirotor Checklists, Warnings and Voice Alerts
Simplified Multirotor Flight Mode Setup and Switch Assignment
Includes AR9020 Receiver with X-Plus Technology
Both the DX20 and the AR9020 receiver it comes with have X-Plus channel expansion capabilities. This means you can add up to eight extra channels with an X-Plus channel expansion module (SPMXP8000 - sold separately). Just plug the module into the receiver, bind it and then assign the extra channels to any function you want.
Fly Smarter with Built-In Telemetry.
Built-in telemetry gives you real-time information on things like your models battery voltage, signal quality, engine or motor temperature, airspeed, altitude and more. You can have the DX20 recite this information on demand using programmable voice alerts. You also have the option of logging telemetry data to the transmitters SD card for review after the flight.
To use the telemetry function, your model must be equipped with a Spektrum telemetry module and telemetry sensors (all sold separately). You will find there are Spektrum telemetry sensors for tracking just about any model function you can think of, and new ones are being added all the time.
Superior Ergonomics. Made to Fit the Way You Fly.
The weight distribution and ergonomics of the DX20 have been optimized to fit the way you fly. The result is a sense of balance and comfort that perfectly complements the speed and precision of DSMX technology.
Notable features include:
Comfortable leather side grips
Adjustable stick length and tension
Machined aluminum, quad-bearing gimbals
User-adjustable mode configurations (1, 2, 3 or 4)
User-assigned switch functions
Easy-to-read backlit screen
Intuitive SimpleScroll programming interface
Includes 3 stick end sets - short, medium and long
Mer info på Engelsk