Produktinformasjon
Hobbywing XRotor Micro BLHeli-S-Dshot600 2-4s
Liten og lett fartsregulator til FPV-racers. Takler 2-4s LiPo inn. Leveres med ledninger på strømtilførsel og uten motorledninger.
Størrelse | 23,8 x 14,5 x 5,8mm |
Vekt | 6g |
Product details in english
LiPo Power input | 2-4S |
Cont.Current | 30A |
Burst Current | 40A |
BEC Output | N/A |
Firmware | BLHeli-S A-H-50 16.5 |
Oneshot 125/42 | Supported |
Multishot | Supported |
DShot150/300/600 | Supported |
Size | 23.8x14.5x5.8mm |
Weight | 6g |
ESC Programming | Stick Programming, BLHeli Suite |
Input wires | 18AWG-100mm* (Red/Black) |
Output wires | no |
DEO | Supported |
Throttle Range Calibration | Supported |
* Note: All the wire length above is the original length, not the length you see from the outside.
FPVs with 150-280mm Diagonal WheelbaseEMF8BB2 chip for great performance, 48MHz.BLHeli-S open-source program implemented in the ESC supports all BLHeli-S functions like ESC programming and firmware upgrade via the throttle control signal cable.Small size combined with light weight for easy installation.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us). The input signal is automatically detected by the ESC upon power up.Compatible with the latest DShot150/300/600 (throttle signal) mode as well.The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes a flight more stable.Compatible with various flight controllers and supports a signal frequency of up to 621Hz in "Regular"signal-receiving mode.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!