Produktinformasjon
Hobbywing XRotor Micro BLHeli 35A ESC
Liten og lett fartsregulator til FPV-racers. Takler 3-6s LiPo inn. Leveres med ledninger på strømtilførsel og uten motorledninger.
| Størrelse | 36,5 x 16,7 x 5,5mm |
| Vekt | 10g |
Product details in english
| Application | FPVs with 150-330mm Diagonal Wheelbase |
| LiPo Power input | 3S-6S |
| Cont.Current | 35A |
| Burst Current | 50A (burst in 10 sec) |
| BEC Output | N/A |
| Input wires | 18AWG-100mm* (Red/Black) |
| Output Wire | Solder tabs (no wires) |
| Connectors (In/Out) | no |
| Size | 36.5x16.7x5.5mm |
| Weight | 10g |
* Note: All the wire length above is the original length, not the length you see from the outside.
Premium MOSFETsToshiba MOSFETs for 20A &35A ESCs
Ultra high efficiency & rapid response4 layers of PCBs and other quality components guarantees less heat.
BLHeli Firmware ReadyUsers can flash or upgrade the BLHeli firmware via the signal cable (on ESCs), and program 4 ESCs simultaneously after connecting their flight controller to the BLHeliSuite software if the flight controller uses the CleanFlight firmware.
Damped Light Mode & OneShot125 Mode SupportedDamped light mode improves the motor retardation and allows users to brake the FPV drones more efficiently. Active-freewheeling technology improves driving efficiency, flight time and heat dissipation.
Super Small & Light architectureF396 48MHz MCUCeramic capacitors3-in-1 drive ICs, 3-ounce copperSupport OneShot125 high speed throttle signal and regular throttle signal (within 500Hz) modes
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!