Produktinformasjon
HeadPlay HD er en ny og spennende type FPV "brille" og kommer med en 7 tommer 1280x800 monitor med 72grader FOV. Brillen kommer med bla HDMI inn slik at de vil fungere perfekt opp mot eks Inspire1 og Phantom 3 (med hdmi modul). "Brillene" er store, men har lav vekt slik at de er svært komfortable å ha på. Headplay kommer med 2 sett padding for å kunne tilpasses til å sitte komfortabelt mot ansiktet. Denne modellen har også "race band" for FPV racing. NB: Kun på lager i fargen Rød.
Headplay HD Head Mounted Display 7 Inch 5.8GHz
The new HeadPlay HD FPV Headset is packed full of features that every FPV enthusiast will enjoy. This headset was designed from the ground up with the FPV pilot in mind, with quality, performance and comfort at the forefront. The headset gently rests on the forehead/cheeks spreading the weight out evenly, which compared to many video goggles which rest on the bridge of the nose instead. Three straps securely hold the HeadPlay HD in place while at the same time blocking light coming in from the outside. The end result is a cinematic experience that is sure to impress.
7 inch 1280x800px Immersive DisplayThe biggest display we could fit, for the most immersion and clarity. A 7 inch HD gloss screen fills your vision and immerses you in FPV. Anti-reflection coating applied to all inner walls gives you the feeling of sitting front row in your own personal cinema.
The view has been compared to an IMAX theatre.
40 channel 5.8GHz ReceiverThe integrated 5.8GHz HyperSensitive a/v receiver designed by RangeVideo, gives you freedom to fly far and low, even with low power 5.8GHz transmitters.
40 channel module with racing band.BMID
HDMI input Be prepared to take advantage of new technology with the Headplay HD. Featuring a future-proof mini HDMI port , you can use the Headplay HD with your DJI Inspire or other HD downlink to see in crystal clear HD.
External A/V input Make long range record breaking flights with aftermarket video receivers. Fly long duration in comfort with the Headplay HD.Connect your 900MHz/1.3GHz/2.4GHz external audio/video receiver to the Headplay HD with the included 2.5 meter long harness.
Speaker Turn up the loud speaker and let everyone around you know that you are flying. Hear the motor roar and the wind howl as you fly.BMID
Spesifikasjoner fra Produsent:
Picture:
Screen resolution: 1280x800Field of View: 72 degreeFully adjustable picture via intuitive menus
GeneralControl via button panel (distinct button design for "blind" operation)Rugged design with extremely durable materialsVery high comfortAdjustable strapsDifferent density foam pads allow you to adapt the goggles to your needs.Weight: 400g (excluding battery)Easy to clean optics
Electrical PropertiesCurrent consumption 340mA@12VSupply voltage: 6-15V Recommended 2S LiPoReverse voltage protection
ConnectorsHDMI type C (HDMI-in)XS9JK (latched high end connector): Power Supply, Video-in, Audio-in, Ground, 5V outSMA antenna connector
Integrated FeaturesNew 40 channel 5.8GHz A/V receiver with channel autoscan. Built-in speaker with volume control on buttons8 segment displaySensitivity: -90dBm
Frequencies (MHz): Band 1: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725 Band 2: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866Band 3: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945Band 4: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880Band 5: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917 New!
Dette følger med i pakken:2 Different lenses (to adapt to personal immersion wishes)1000mA 2S hard case battery w/ PCMCharging Lead 3.5mm Banana Plug to 2.1mm BarrelUniversal Li-po battery charger w/ interchangeable prong heads30cm Cable (1 foot) with barrel type battery connector250cm Cable (8 feet) with AV-in, Audio in and barrel connector2 Face foam packs (different densities to allow comfort adjustment)
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!