HjemUtgåtte varer(slettet)
Print produktark

Serpent 411 1/10 Sport Touring Kit

Produsent Serpent
Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Anbefalt tilbehør
Linker
Tips en venn
Anmeldelser

Produktinformasjon

Byggesett av 411 1/10 touring i 190mm bredde. Leveres uten elektronikk, hjul og karosserie. Passer for deg som ønsker å bygge selv og sette på eget valgt karosseri, egen elektronikk i bilen eller ønsker komplett delesett liggende.

Anbefalt tilbehør

Chassis
Supernarrow, symmetrical , durable black glass-fibre chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.
Sport touring Kit

Topdeck
Durable black glass-fibre topdeck with optimised flex design.Battery-mount brackets and Lipo-holdersEasy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.

Servo-mount
The servo is mounteded on a seperate plate, so flex is less influenced.

Shocktower front
Black glass fibre shocktower with 3 upper shock mounting holes to choose from . Holes for an extra central bodypost are already made as well.

Front bracket
Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.

Front suspension
Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

C-hub / steeringblock
The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheelguidance without chatter.

Shocktower rear
Black glass fibre shocktower with 4 upper shock mounting holes to choose from . The rear bodyposts are mounted to the top of the rear shocktower.

Rear bracket
Machined alumnium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR

Rear suspension
Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.

Rear upright
Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.

Motormount
Machined aluminium motormount / middle shaft support.

Middle shaft
Ballraced middle shaft with 2 small pully?s and the main Serpent spur gear.

Bumper
Large foam front bumper captured by a upper and lower nylon bumper

Bodymount
Front bodymount is mounted trhrough the front bumper, and the rear ones are seated on the shocktower. Multiple bodyposiiton holes to choose from.

Gear-diff
Very compact ballraced geardifferential in the rear, with steel gears and axles for durablity. Supersmooth.

Spool
Front nylon lightweight spool with screw mounted front gearpully

Transmission / belts / pullies
Smooth low friction fine pitch belts combined with optimised nylon pullys

Driveshaft / wheelhex / wheelaxle
Steel driveshafts, combined with ballraced wheelaxles and nylon wheel-hex adaptors

Steering system
Steering system with optimised ackermann for neutral steering-feeling.

Shockabsorbers
Latest type RCM competition shockabsorbers with membrames and checked colorcoded race springs.

Ball-bearings
Fully ballraced with oiled high speed sealed stainless steel bearings.

Manual and decals:
Full color assembly manual which shows clearly all assembly steps, has all exploded views for easy parts-finding and detailed list with spare parts and optionals. Decal-sheet with Serpent and 411 logo?s are included as well.

Packing
The 411 Sport comes in a strong small carton box with full color printing.

Optionals / upgrading
The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all optionals, alsof fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the optionals section of the 411 Sport as well.

Required:
2-Channel radio system
2S 7.4V LiPoly battery
Battery charger
Electronic speed control
Electric motor
Pinion gear
1/10 scale body
Paint for body
Wheels
Tires
Glue for wheels and tires
Steering servo for 1/10 scale
Building Tools
Other suggested items: Reamer/hole punch, CA glue, thread-locking glue, silicone fluid

Anbefalt tilbehør

Bronto LiPo-Safe Bag / Transportbag (M)
3|566|523
kr 165,-
SkyRC E680 12/220V 80W Computerlader
3|273|235
kr 699,-
Varta Industrial Pro AA batterier - 4stk
3|77|4
kr 29,-
SkyRC Cheetah 1/10 BL Sensor sett 4000KV 8.5T
3|8|562
kr 1.295,-
HPI-6924 Pinion Gear 24 Tooth (48DP)
3|3|34
kr 69,-
SkyRC Cheetah 1/10 BL Sensor sett 3250KV 10.5T
0|0|562
kr 1.195,-

Produktanmeldelser

Desverre ingen tilbakemeldinger på dette produktet enda.

Gi din tilbakemelding
Produkt
Serpent 411 1/10 Sport Touring Kit
Velg karakter
Overskrift
Produktanmeldelse
Logg inn her
Retningslinjer
Produktanmeldelser er ment for at du skal dele din erfaring med andre som søker kunnskap om produktet.
Urelevant, uriktig eller støtende innhold vil bli fjernet.

Spørsmål, reklamasjoner e.l: kontakt oss direkte
Flere så også på



100% norsk nettbutikk
Om oss

Lynrask levering
Les mer

60 dager bytterett
Gå til bytte & retur

Kundeomtale på prisjakt
Les våre omtaler