Produktinformasjon
Phoenix Model Extra 300S Aerobatic 1.60 med vingespenn på 1,9 meter. Flott finish med ekte Oracover betrekning og lakkerte glassfiberdeler. Modellen har ferdig hengslede ror og cockpit er ferdig med malt pilot klar til innsats. Denne modellen kan bygges med fuelmotor, elektromotor eller bensinmotor. Merk at det ikke følger med drivstoff-slanger eller tnakinnlegg som er godkjent for bensin, så det må man kjøpe separat.
Introducing
We are dedicating this model to the sport flyer / 3D flyer looking for a modern design to install the most popular engine size in the modeling community. The Extra 300S is a great aerobatic performer. With the shorter tail moment, it performs some of the best tumbling maneuvers in the circuit. This beautiful aerobatic aircraft features a fiberglass cowl. Pre covered in a colorful and attractive design which is sure to draw attention. All covering is completed at the factory, this cuts down the finishing time on the airplane. There is very little work that needs to be done to finish the airplane.
br />
Technical data - Wingspan: 1885mm (74.21 in)
- Length: 1680mm (66.14 in)
- Flying weight: 5.5- 6.5 kg
- Radio: 4 channel . 5 standard hi torque servo: 2 aileron; 2 elevator; 1 rudder; 1 standard servo throttle (not included)
- Radio: 4 channel . 5 standard hi torque servo (up 11kg): 2 aileron; 2 elevator; 1 rudder; 1 standard servo throttle (not included)
- Engine: 30cc gas(not included)
- Propeller: 18x6 ; 18x8 (2 blade) (not included)
- Experience level: Intermediate
- Plane type: Scale aerobatic
RECOMMENDED MOTOR AND BATTERY SET UP
Motor: RIMFIRE .160 (not included)
Lipo cell: 12 cells / 5500 ? 6000mAh (not included)
Esc: 160A HV (not included)
Feature
Capable of both precise and extreme 3D aerobatics
Designed for compatibility with both GP and EP flight
Genuine Oracover covering
Bolt-on two-piece wing for easy transport and setup at the field
Removable canopy for easy change lipo battery and set up radio
Extremely lightweight laser-cut all-wood construction
Durable factory-painted fiberglass cowl
Prepainted pilot figure, preinstalled in cockpit
All hardware included
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!