Produktinformasjon
Mål pitch og roll med høyeste nøyaktighet. RC Loggers Digital Pitch Gauge 2 Lite kommer med de mest populære funksjonene som f.eks magnetfestet dislpay som kan snus opp ned, kalibrering, auto power-off og lydalarm for din valgte vinkler.
The Digital Pitch Gauge 2 Lite offers two dimensional measurement - Pitch angle as well as Roll angle measurement.
Measure modes (Main rotor blade)The Digital Pitch Gauge 2 Lite comes with a handy detachable main rotor blade mount adapter that allows you to adjust the main rotor blade with ease. Just put the adapter in place and snap on the Pitch Gauge via the inserted magnets.
4 memory profiles to preset target anglesNow you can pre-define your preferred target angles beforehand and save it into your Digital Pitch Gauge 2 Lite. Four memory profiles are available for storing target measurements for measurement mode of the profiles. During tuning, a buzzer alert will signal when the target angle is reached.
3 seconds countdown time to hold the display, set zero angles, or set target angleA countdown time of 3 seconds is available when you are freezing the display for easier reading, setting a reference zero angles or setting a target angle for memory storage. This means that you have a buffer period for placing and adjusting the pitch gauge in the desired position after pressing the function button. No more worries about affected readings by the button pressing action.
| Included | Digital Pitch Gauge 2 Lite |
| Mount adaptor for main rotor blade |
| Rubber band protector |
| Operating instructions |
| Operating temperature | 0 to +40 Celsius |
| Operating voltage | 6 V/DC (CR2032 x 2) |
| Power consumption | max. 0.5 W |
| Resolution | 0.1 Degree |
| Compatible blade width | Main rotor blade (21 to 75 mm) |
| Dimensions (W x H x D) | Pitch Gauge (62 x 42 x 16.5 mm) |
| Main rotor blade mount (120 x 72.5 x 15.6 mm) |
| Weight | Pitch Gauge (41 g) |
| Main rotor blade mount (25 g) |
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!