Produktinformasjon
Flott skalamodell fra Phoenix Model med luft-retract. Modellen kan settes opp med fuel eller elektromotor etter eget ønske. Merk at dette bare er flysettet og ingen motor eller elektronikk følger med, men all hardware som luftertract, motorfeste for el og fuel, tank, linker og hengsler følger med.
Anbefalt tilbehør
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 249,-
0| 0,-
Uten din rabatt kr 249,-
3|93|269
PS! Produkt kan avvike fra video.
Les merKlippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.
OK
Introducing
The PC-9 program officially started in 1982. Although some aerodynamic elements were tested on a PC-7 during 1982 and 1983, the first flight of the first PC-9 prototype took place on 7 May 1984. A second prototype flew on 20 July of the same year; this prototype had all the standard electronic flight instrumentation and environmental control systems installed and was thus almost fully representative of the production version.Nice scale detail, solid construction and delightful flight performance, all in an easy-to-assemble package. This plane flies like a sport model while maintaining many of the scale details of the original Pilatus. The wing design incorporates a high efficiency airfoil using ultra modern construction techniques. Genuine OraCover® provides a durable, refined finish. It is completely built, requiring minimum assembly. The PC9 Pilatus is a great plane very well made and very enjoyable.
Technical data
Wingspan: 1624mm (64in)Length: 1589mm (62.5 in)Flying weight: 3.7 - 4.5 kg Wing area: 37dm2Wing loading: 95g/dm2Wing type: Naca airfoilsCovering type: Genuine ORACOVERRetract gear type: Air-retract With CNC Suspension Metal Struts (included)Spinner size: 70mm (included)Radio: 6 channel minimum (not included) Servo: 6 standard servo: 2 aileron; 1 elevator; 1 rudder; 1 retract; 1 throttle (not included)Recommended receiver battery: 6.0V 2000mAh NiMH (not included) Servo mount: 21mm x 42 mmPropeller: suit with your engine Engine: .61-.91 / 2-stroke glow (not included)Motor: brushless outrunner 1800-2000 W, 500 KV (not included)Gravity CG: 85 mm (3.3 in) Back from the leading edge of the wing, at the fuselageControl throw Ailerons: Low: 10mm up/down, 10% expo; High: 12mm up/down, 10% expoControl throw Elevators: Low: 10mm up/down, 12% expo; High: 12mm up/down, 12% expoControl throw Rudder: Low: 20mm right/left, 15% expo; High: 35mm right/left, 15% expoExperience level: IntermediatePlane type: Scale Military
RECOMMENDED MOTOR AND BATTERY SET UP Motor: Rimfire.80 (not included)Propeller: 15x6- 15x8 E APC (not included)Lipo cell: 6 cells / 5000 ? 6000mAh (not included)Esc: 80-100A (not included)
Feature
Designed for compatibility with both GP and EP flight
Covered in genuine ORACOVER®
Top quality balsa/light plywood construction
Air-retract With CNC Suspension Metal Struts included
Full-depth cockpit and instrument panel and pilot included
Bolt-on two-piece wing for easy transport and setup at the field
Removable canopy for easy change lipo battery and set up radio
Strong Light Weight Construction
Superb flying characteristics, plus an accurate scale outline
High-quality hardware package included