Produktinformasjon
Tiger drive som passer de fleste OS-motorer. Monteres på motoren istedenfor vanlig snorstart, kan brukes sammen med S686 for starting av fuelmotor. Se nettsiden til Sullivan for mer info over hvilke motorer dette startsystemet er kompatibelt med.
This unit replaces the recoil starter or onboard starter found on many R/C Cars, trucks, boat and helicopters, and permits use of a standard hand-held starter. This eliminates broken ropes and burned out onboard starters, and allows the engine to be turned faster for easier starting. The drive direction can be oriented in four directions to accommodate exhaust and chassis arrangement.
Performance note: TigerDrives are much more robust than the original pull starter or onboard starter. If you use a high torque starter (such as a Sullivan starter or DeWalt drill) be careful not to flood (hydraulically lock) the engine. The TigerDrive can apply considerable torque to the engine, and you can damage the engine itself. To relieve Hydraulic lock, loosen the glow plug and turn the engine over a few times. To further reduce the chance of damaging the engine or one way bearing due to Hydraulic Lock, Sullivan recommends the use of Drills with a clutch or other torque limiting device.
Note to HPI Savage Owners: Installation of the TigerDrive units into the Savage chassis requires extensive modification of suspension components unless the Extended Chassis Kit has been installed! Some documentation of these modifications has been published in major forums and personal websites. Due to the nature of these sites, we do not provide links to them. However, most can be found through a basic web search.
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!