Produktinformasjon
Lader med en utgang på 200W. Laderen takler opp til 18V innspenning og har max ladestrøm på 10A og kan lade LiPo opp til 6S. Laderen har innebygget balanserer og det følger med kabel så den kan kobles opp til PC med USB for å overvåke ladingen der. Software følger også med.
USB-posten kan også brukes til å lade mobiltelefoner og lignende, den gir 1A 5.0V ut.
Dette følger med i pakken:
200W laderLedninger med 4mm bananstikk for tilkobling i powersupplyKrokodilleklemmer for tilkobling av lader til 12V bilbatteri eller lignendeXH-balanseringsbrettLadeledning med krokodilleklemmerLadeledning uten endeplugg for pålodding av selvanskaffet batteripluggUSB-kabelCD med software
Ønskes andre balanseringsbrett kan det kjøpes utenom, se under tilbehør. Det ligger også diverse alternative ladekabler som man kan kjøpe i tillegg.
Anbefalt tilbehør
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 10,-
0| 0,-
Uten din rabatt kr 10,-
3|662|5
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 119,-
0| 0,-
Uten din rabatt kr 119,-
3|179|523
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 135,-
0| 0,-
Uten din rabatt kr 135,-
3|404|523
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 19,-
0| 0,-
Uten din rabatt kr 19,-
3|518|5
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 22,-
0| 0,-
Uten din rabatt kr 22,-
3|532|5
Operating voltage range: DC 11. 0-18.0 VoltCircuit power: Max. Charge power 200WattsMax. Discharge power 25WattsCharge current range: 0.1-10.0ADischarge current range: 0.1-5.0ACurrent drain for balancing Li-Po/Ion/Fe: 300mA/cellLi-ion/Fe/Polymer cell count: 1-6cellsNiCd/NiMH battery cell count: 1-18cellsPb battery voltage: 2-20VNet weight: 607gDimension: 150x116.3x53mm
SkyRC ultimate employs the circuit that features output power of 200 watts. It can charge or discharge up 18 cells of NiCd/NiMH or 6 series of Lithium batteries with maximum current of 10A.B6 ultimate has an individual cell voltage balancer, so it does not required any balancer separately when charging Lithium batteries (LiPo/LiIon/LiFe) for voltage balancing.
Opetimized operating software
SkyRC B6 ultimate features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the users fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery balancer
SkyRC B6 ultimate employs an individual-cell-voltage balancer. It isn?t necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, SkyRC B6 ultimate can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
SkyRC 6 ultimate is adaptable to various types of lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, ?fast? charge reduce the duration of charging, whereas ?store? state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the batterys voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the AUTO charging mode.
Capacity limit
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature threshold
The battery?s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. This function is available by connecting temperature probe, which is included in the package.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect
Data store/load
For users convenience, it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge. These data can be called back at any time you need and the process can be executed without program setting.
Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the batterys activity.
PC based analysis using USB Communication
The B6 Ultimate is fitted with a mini USB port on the right-hand side of the case; a USB wire can be connected to this socket in order to link the charger to a PC."charger monitor" Program enable you to view graphs of charge and discharge curves, with a capacity, voltage, temperature and ampere display,and individual curves can be individually suppressed or superimposed to allow a visual comparison of the data.
USB Power Supply
The USB power supply can provide 5V, 1A continue current. You can power your mobile phone, digitalcamera or even your IPod via the USB power supply.
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!