Produktinformasjon
ETS Airspeed Expander V3
For Micro-Logger V3.
Kan brukes som frittstående måler av maks hastighet, eller sammen med Micro-Logger V3 for full logging.
Our tiny new Airspeed and Altitude MicroSensors have two modes: they work standalone with no additional equipment required, as well revving up your eLogger and PowerPanel LCD for full data logging. These precision instruments use pressure differential to measure Airspeed or Altitude.
For standalone mode, simply plug the sensors into a spare receiver channel or small battery (3V to 16V) and fly your model. Then, when you land, your maximum altitude orairspeed will display on the built-in 7 segment LED. For example, if you flew to 281 feet, the unit will display 2 ? 8 - 1 repeatedly. No configuration, additional equipment, or computer required!
Or, connect your MicrosensorTM V3 to any of our eLogger products for full logging and graphing of your flight?s speed or altitude!
New: now you can use the MicrosensorTM V3 sensors with your own Firmware/Microcontroller! Click here for information on using the MicroSensor with your own firmware.
Measures airspeed from approx 2 MPH to 350 MPH (3KPH to 563KPH) with resolution of approx 1 MPHPower input (Standalone Mode) ? 3V to 16VCircuit Board: Weight 4 grams (0.15 oz), dimensions 28 mm x 16 mm x 10 mm (1.1? x 0.62? x 0.4?)Includes Pitot Tube (pictured below) and approx 3feet (1 meter) of small diameter silicon tubing for pitot tubePrecalibrated ? no user calibration requiredAdvanced Temperature CompensationSelectable Metric or English units
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!