HjemDroner for FPV RaceRace dronerFPV Racers Ferdigbygget
Print produktark

iFlight ProTek35 Analog 4S w/XM+ - BNF

Produsent iFlight Innovation
Tilhører kategori
FPV Racers Ferdigbygget
Handle nå, del opp eller betal senere. Les mer
kr 4.295,-
Kjøp
Overvåk
+
-
Husk i favoritter
3|1|1124
VareID: 50934, Produktnr: C009168
Produktinfo
Anbefalt tilbehør
Deler
Tips en venn
Anmeldelser

Produktinformasjon

Flight ProTek35 HD leveres her med 3600KV Xing 2203.5-motorer for 4S LiPo. Analog videosender og Caddx Turbo Eos V2-kamera ferdig montert så her er det meste klart. Modellen er forhåndstunet for smooth flyving og med T700-karbon så har man også en ramme som er meget stiv og holdbar.

Anbefalt tilbehør

For å fly denne versjonen trengs batteri, FrSky-kompatibel radio og analoge FPV-briller. XM+mottakeren er EU_LBT D16.

iFlight ProTek35 Analog 4S w/XM+ - BNF

GoPro og gopro--mount følger ikke med. Bilder kan vise TBS-mottaker men denne pakken er med FrSky XM+.

iFlight ProTek35 Analog 4S w/XM+ - BNF

Inkludert i pakken:
  • Protek35-ramme
  • Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
  • 1 x Albatross-antenne
  • 2 x Nazgul 3535-propell-sett
  • 1 x TPU Naked Gopro Bottom Stand
  • 2x iFlight batteristropp
  • 4x XING 2203.5 motorer
  • True-AIO Board Beast Whoop F7 AIO 45A


    • Nødvendig tilbehør:
  • Batteri 4S +-1300mAh XT60
  • FPV Goggles
  • 6+-kanals radio FrSky D16
  • Lader
    • Spesifikasjoner
    Wheelbase151mm
    Bunnplate3,5mm
    Toppplate2mm
    Vekt305g uten batteri
    Product details in english
    PRODUCT DESCRIPTION
    After our very popular 3inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.

    Our all new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what were talking about here...

    ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves.

    A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).

    Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.

    Features:
    - No Props or frame in view!
    - High performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
    - T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
    - Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
    - Low Resonance frame construction (Less Jello, more Cinematic footage)
    - Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
    - Butter smooth 2203.5 3600KV (4S)
    - Pre-tuned with smooth freestyle settings

    PRE-TUNED & PRE-SETUP:
    - Dont worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
    To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
    - Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesnt end in a mess!
    Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

    ProTek35 BNF Specs:
    - Board Beast Whoop F7 AIO 45A (LINK)
    - Motor: XING 2203.5 3600KV (4S)
    - Wheelbase: 151mm
    - Body Size: 118*94.5mmmm
    - Bottom plate thickness: 3.5mm
    - Top plate thickness: 2mm
    - Top and bottom plate spacing: 20mm (aluminum standoff height)
    - Propeller size: 3.5 inch
    - FC pattern: 25.5*25.5mm / 20*20mmmm
    - FPV cam spacing: 20mm
    - Weight: 305g (without battery)

    ProTek35 Quad BNF Included Components and Parts
    pre-built and tested Quadcopter
    - 1x ProTek35 Frame
    - 1x Caddx.us Turbo Eos V2 FPVCam
    - 2x TPU camera side plate soft mount
    - 2x Nazgul 3535 propeller (Set of 4 - Color May Vary)
    - 1x iFlight Lipo Strap 15*150mm (Color May Vary)
    - 1x iFlight Lipo Strap 15*250mm (Color May Vary)
    -1x GoPro TPU bottom stand black (GoPro Protector not included)

    FC // Beast F7 AIO (LINK)
    Specification:
    MCU: BGA-STM32F745
    Gyro: MPU6000
    Blackbox: 8Mb Onboard Flash
    BEC output: 5V 2.5A
    Barometer: BMP280
    Connector: Micro-USB
    OSD: AT7456E
    FC Firmware?IFLIGHT_F745_AIO
    Mounting pattern: 25.5*25.5mm ?3mm
    Dimensions: 32.5*32.5mm
    Weight: 8.5g

    ESC // 45A 2-6S
    Specification:
    Uarts: 5
    Current Sensor: Yes
    Input: 2-6S LIPO
    Current scale: 200
    Constant: 45A / Burst: 50A
    BLHeli: BLHeli-S
    Telemetry: no
    ESC Firmware: BlheliS G-H-30
    Mounting pattern: 25.5*25.5mm/?3mm
    Dimensions:?32.5*32.5mm

    VTX// 5.8GHz SucceX Micro 300mW VTX (LINK)
    -Power: PIT/25/100/200mW/300mW
    -Antenna interface: IPEX (UFL)
    -VTX protocol : IRC Tramp
    -Size: 13.5x14.5mm
    -Weight: 1.4g
    Size Extender (stackable adapter):
    Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g
    Whoop VTX size: 16mm/25mm, 2mm hole, total weight (incl. VTX): 2.9g

    Recommendation of battery
    * Fullsend 4S 95C 1300mAh (LINK)
    Mer info på Engelsk

    Anbefalt tilbehør

    Bronto Lipo-Safe Bag 30x23cm (L)
    3|178|523
    kr 119,-
    4s 1500mAh -100C - CNHL FPV Black Series XT60
    3|130|314
    kr 259,-
    SkyRC T200 12/220V 2x100W Computerlader
    3|22|235
    kr 1.399,-
    4s 1550mAh -100C - Gens Ace FunFly XT60
    3|32|314
    kr 359,-
    4s 1300mAh -100C - Gens Ace FunFly XT60
    3|14|314
    kr 299,-
    Fat Shark Scout FPV Briller/Goggles
    3|16|932
    kr 2.595,-
    SkyRC S65 220V 2-4S Lader 65W
    0|0|235
    kr 549,-

    Produktanmeldelser

    Desverre ingen tilbakemeldinger på dette produktet enda.

    Gi din tilbakemelding
    Produkt
    iFlight ProTek35 Analog 4S w/XM+ - BNF
    Velg karakter
    Overskrift
    Produktanmeldelse
    Logg inn her
    Retningslinjer
    Produktanmeldelser er ment for at du skal dele din erfaring med andre som søker kunnskap om produktet.
    Urelevant, uriktig eller støtende innhold vil bli fjernet.

    Spørsmål, reklamasjoner e.l: kontakt oss direkte
    Flere så også på



    100% norsk nettbutikk
    Om oss

    Lynrask levering
    Les mer

    60 dager bytterett
    Gå til bytte & retur

    Kundeomtale på prisjakt
    Les våre omtaler