HjemRadioutstyrØvrig radioutstyrTBS Crossfire
Print produktark

Team Blacksheep TBS Crossfire TX LITE

Tilhører kategori
TBS Crossfire
Handle nå, del opp eller betal senere. Les mer
kr 2.395,-
3|5|1336
VareID: 42232
Produktinfo
Tips en venn
Anmeldelser

Produktinformasjon

Team Blacksheep Crossfire TX LITE er en sendermodul for radioer med JR-type modulfeste. Modulen baserer seg på RF-teknologi og kan tilby to-veis kommunikasjon med lang rekkevidde og lav forsinkelse. Effekten er justerbar mellom 10mW og 2W slik at man kan justere seg inn på lovlig sendereffekt der man flyr.
TBS Crossfire TX LITE kommer uten Bluetooth modul.

Pakken inneholder:
  • TBS Crossfire Sendere
  • TBS Crossfire JR AdapterTBS Crossfire Stock Tx AntenneCrossfire Futaba kabelCrossfire Graupner kabelCrossfire PWM PigtailCrossfire JST til XT30 kabel

    Spesifikasjoner
    Frekvensbånd868MHz (EU) og valgbar 915MHz(USA/Asia/Australia)
    Innspenning3,5-13V
    Størrelse65x48x22mm (JR-Modulstørrelse)
    Vekt76gram
    Product details in english
    The TBS CROSSFIRE TX LITE packs all the regular Crossfire technology. As it comes without a Bluetooth module, its perfect for FPV pilots who want to save a bit of money!

    A NEW ERA OF CONNECTIVITY
    The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.

    Remote control links, however, are tasked with much more than range. Latency, telemetry, robustness against interference, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead :)

    DEVELOPED BY EXPERTS
    Team BlackSheep has been notorious for long range records, close-to-ground proximity flying in the Alps and deep urban operations. During our numerous missions all around the globe we have gathered a list of requirements, and have found that no existing system can cover them all. So we set on a long and painful path to develop a RC link system entirely from scratch, put it through its paces for over a year to ensure top-notch reliability and state-of-the-art functionality.

    Through the OLED Display on the transmitter, you can monitor the real-time location of your drone (TBS GPS or BlackBox with DJI Naza or APM-based GPS required). The up- and downlink status provide a feeling of safety, the configuration options through the OLED display do away with any PC-based configuration tools. The pulsing LED relays your link budget and link health in colorized form (green = keep going, orange = turn around). In case of a crash, the location of the drone is visible on the OLED as well. The built in battery on the receiver turns it into a beacon automatically - and it will continue to transmit its last known location until the battery runs out.

    IT JUST WORKS
    Apart from unparalelled range, the thing that we are most proud about on the TBS CROSSFIRE is that it just works. In the past, our question always was "could our R/C link keep up?". With the TBS CROSSFIRE comes peace of mind. But dont take our word for it. All leading drone racing organizers require pilots to fly the TBS Crossfire. All top drone racers fly the TBS Crossfire. The furthest long range missions are flown with TBS Crossfire. This is the long range link that everyone has been waiting for!

    Telemetry / CRSF
    As a modern R/C link, it has telemetry built in. Two-way communication opens up new possibilities. From streaming MAVLink to you smart device (no Mavlink stream support for Crossfire Micro TX!), to updating your firmware, setting your video transmitter channel or adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms.

    Features:
    Long range, adaptive and robust remote control system for your aircraft
    Immune to on-board noise
    Two-way communication link with real-time link vitals and telemetry
    Self-healing & frequency hopping (DSSS, FHSS)
    Adaptive bandwidth control and range optimization
    Serial Modem capable of transmitting MAVLink or other serial protocols (up & downlink)
    RX beacon mode to recover your downed aircraft
    Super easy binding and configuration via built-in display of your R/C
    Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
    Two receiver models: 8 port Diversity Rx, 4 port Mini-receiver (4g weight!)
    8 or 12ch output via SBUS/PPM/CRSF on both receivers
    Ability to fly with multiple friends at the same time (10 or more)
    Selectable RF power from 10mW to 2W (local restrictions apply)
    Transmitter LED shows link health
    Micro-receiver for smaller drones. Smaller than you think!
    Software updates via RF Link

    Technical specifications:
    Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)
    Input Voltage: 3.5 - 13V
    Power consumption: 1.1W (@10mW) - 3.2W (@2000mW)
    Dimensions: 55 x 89 x 15 mm
    Weight: 76g

    Package includes
    TBS Crossfire Transmitter
    TBS Crossfire JR Adapter
    TBS Crossfire Stock Tx Antenna
    Crossfire Futaba cable
    Crossfire Graupner cable
    Crossfire PWM Pigtail
    Crossfire JST to XT30 cable
    Mer info på Engelsk
    Flere så også på