Print produktark

DJI Inspire 2 Part37 Car Charger

Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Tips en venn
Anmeldelser

Produktinformasjon

Billader for Inspire 2. Måler temperatur og spenning i sigarettenneren, slik at den selv kan stoppe å lade dersom det skulle være nødvendig. Ladetid er rundt 2t 30min for to batterier og 3t 40min for radio. Laderen brukes med Inspire 2 Battery Charging Hub.
Product details in english
The Car Charger for Inspire 2 is used to charge the Intelligent Flight Battery or remote controller through a car?s cigarette lighter port. When charging the Intelligent Flight Battery, the Inspire 2 Intelligent Flight Battery Charging Hub is a must. It comes with low-voltage protection and overheating protection which automatically cut off charging if your starting battery voltage is too low or cigarette lighter port exceeds a certain temperature.

Highlights
The charge time for two fully charged batteries is 2.5 hours.
Low voltage protection
Overheating protection

In the Box

Specifications
  • Product Model: C6S90-2
  • Operating Temperature: 32° to 104° F (0° to 40° C)
  • DC Input: 12.3-16 V (Sedan) ; 25-30 V (Coach)
  • DC Output: 26.1 V; 3.45 A; 90 W
  • Charge Time*:
  • Two Batteries: Approx. 2 hr 30 min
  • Four Batteries: Approx. 5 hours
  • Remote Controller: Approx. 3 hr 40 min
  • * The charge time was tested in a lab environment at room temperature and should be taken as reference only.


  • Compatibility
  • Inspire 2
  • Inspire 2 - Battery Charging Hub
  • Mer info på Engelsk
    Flere så også på