Produktinformasjon
Fantastisk FPV combo sammensatt av 4stk XRotor 2405 - 2250KV motorer og 4stk XRotor Micro 30A ESC´er. Du får også med fire tre-blads (5x4,5x3) propeller i stilig design! Comboen kan brukes med 3-4s LiPo batteri.
MotorStørrelse | 2405 |
KV | 2250 |
Vekt | 35,5g |
ESCStørrelse | 23,8 x 14,5 x 5,8mm |
Vekt | 6g |
Product details in english
MotorProduct Name | XRotor 2405 2250KV |
Product Number | 30405407 |
KV Rating | 2250KV |
LiPo Cells | 4S |
No-Load Current(A/10V) | 1.4A |
Motor Resistance | 0.047ohm |
Max Continuous Current / Power | 25A/420W |
Stator Diameter/Thickness | 24mm/5mm |
Slot/Plot Count | 12/14 |
Motor/Shaft Diameter | 30.8mm/5mm |
Motor Length (w/o, w/ Shaft) | 15.9mm/29.4mm |
Weight | 35.5g |
Excellent Product DesignSuper thin disc-type structure with a low center of gravity guarantees better control feel.Concave anti-skid teeth together with the lock-up screw at the bottom effectively prevent rotorfrom moving or loosing and strengthens reliability of the motor.One-piece eight-bladed centrifugal fan greatly reduces the operating temperature of the motor.Super light weight, only 35.5g.Low Vibration & Precise ControlThe precisely balanced rotor guarantees low vibration & noise during high-speed rotation and more precise and reliable motor control.
Super Impact ResistanceHigh-strength CNC-machined aluminum alloy frame which features the strengthened cross beam structure combined with the high-precision hollow alloy steel shaft going through the entire motor guarantee the super impact resistance of the motor.
Top Quality ComponentsSpecial 240°C heat-resistant windings (after vacuum dip coating treatment) can stand high, surge current.N54 super magnets guarantee high torque output.Super thin (0.2mm) silicon sheets imported from Japan guarantee low (power) loss, less heat generation but high magnetic permeability.Dedicated 4mm bearings (the thickness is enlarged by 33% comparing to the regular 3mm bearings on the market) imported from Japan guarantee great load-bearing capacity and impact-resistance.ESC |
LiPo Power input | 2-4S |
Cont.Current | 30A |
Burst Current | 40A |
BEC Output | N/A |
Firmware | BLHeli-S A-H-50 16.5 |
Oneshot 125/42 | Supported |
Multishot | Supported |
DShot150/300/600 | Supported |
Size | 23.8x14.5x5.8mm |
Weight | 6g |
ESC Programming | Stick Programming, BLHeli Suite |
Input wires | 18AWG-100mm* (Red/Black) |
Output wires | no |
DEO | Supported |
Throttle Range Calibration | Supported |
* Note: All the wire length above is the original length, not the length you see from the outside.
FPVs with 150-280mm Diagonal WheelbaseEMF8BB2 chip for great performance, 48MHz.BLHeli-S open-source program implemented in the ESC supports all BLHeli-S functions like ESC programming and firmware upgrade via the throttle control signal cable.Small size combined with light weight for easy installation.Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us). The input signal is automatically detected by the ESC upon power up.Compatible with the latest DShot150/300/600 (throttle signal) mode as well.The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes a flight more stable.Compatible with various flight controllers and supports a signal frequency of up to 621Hz in "Regular"signal-receiving mode.
Mer info på Engelsk
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!