Print produktark

Hobbywing XRotor Micro 40A 4in1 BLHeli-S DShot600

Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Tips en venn
Anmeldelser

Produktinformasjon

Hobbywing XRotor Micro 40A 4in1 BLHeli-S DShot600 gir deg fire regulatorer i en hvor hver regulator er på 40A, dette sparer vekt og plass, ypperlig til FPV-racers. Takler 2-5s LiPo.
Inngangspenning2-5s LiPo
Størrelse42.6 x 36 x 4mm
Vekt10g
Product details in english
  • 4IN1 ESC w/BEC - Super Small & Light architecture
  • BLHeli-S Firmware Ready- The ESC (with great performance and rich functions) uses the original BLHeli-S firmware and supports adjusting parameters or upgrading firmware via different methods (i.e. via throttle signal wire with using other development board or a FC flashed with the cleanfight/betaflight firmware
  • Supports regular throttle signals (with the frequency of up to 621Hz), Oneshot125 (125-250us) high-speed throttle signals (with the real-time frequency of up to 3.8KHz), also Oneshot42 (42-81us) and Multishot (2-25us) super High-speed throttle signals. All this makes communication between FC and ESC more agile, throttle linearity smoother, and throttle response extremely faster
  • DEO Technology/Active Freewheeling
  • The DEO (Driving Efficiency Optimization) technology implemented in the ESC has multiple advantages:
  • Active braking. When reducing the throttle amount, the motor will decelerate very quickly. This feature enables pilots to more easily perform all maneuvers like sharp turns, altitude changes, and sudden braking.
  • Higher driving efficiency, longer flight time.
  • Lower ESC temperature and a more reliable operation

  • ModelXRotor Micro 40A 4in1 BLHeli-S DShot600
    SKU30901076
    ApplicationFPVs with 130-280mm Diagonal Wheelbase
    LiPo Power input2S-5S
    Cont.Current40Ax4
    Burst Current50Ax4
    BEC Output5V & 1.5A
    Input Wires14AWG-130mm* (Red/Black)
    Output WireNo wires but solder tabs
    Connectors InXT60 (w/ Wires Soldered on)
    Connectors Outno
    Weight10g
    Size42.6x36x4mm
    FirmwareBLHeli-S A-H-50 16.5
    Throttle CalibrationSupported
    ESC ProgrammingStick Programming, BLHeliSuite
    DEOSupported
    OneShot ModeSupported
    TimingSupported
    Motor RotationSupported

    * Note: All the wire length above is the original length, not the length you see from the outside.
    Mer info på Engelsk
    Flere så også på