Print produktark

TopModel Samsara ARF

Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Tips en venn
Anmeldelser

Produktinformasjon

TopModel Samsara ARF er en 3,2 meters motorglider, leveres ARF klar til montering av elektronikk. Modellen har flaps og T-hale og er trukket i original oracover.
TopModel Samsara ARF

For å fly trenger man i tillegg motoroppsett, 6 servoer, mottaker, mottakerbatteri og sender.
Servovalg kan være 4xHS-82/85, 1stk Graupner DES 428 og 1stk mikroservo ( HS-5055MG ). Eller tilsvarende.
Vingespenn320cm
Lengde:180cm
Vekt:2,0-2,2kg
Vingebelastning28-31g/dm2
Vingeareal71dm2
Vingeprofil:AG
Product details in english
Samsara is indispensable for thermal flying. Flaps allow to fly efficiently even in bad weather, make thermals and also works well as airbrakes and thus allow the land to the foot even under the most difficult conditions. Samsara will satisfy all those interested who want to enjoy the beautiful flying in thermals. It is characterized by calm and stable gliding. Three-piece wing has a lightweight balsa framework with D-box. The fuselage is made of white gel-coated fiberglass and reinforced with carbon. The floating elevator is balsa framework with carbon spar and leading edge. The elevator is mounted on a fiberglass bed. Rudder and elevator are controlled by servo in the fin. The drive unit is designed so that it is possible to use 3S lipo battery.

RC equipment:
5 channel
7 channel receiver
4 micro servos for ailerons and flaps (Hitec HS 85MG)
1 micro servo for elevator (Graupner DES 428 BB,MG)
1 micro servo for rudder (Hitec HS 5055MG)

Motor: MEGA Acn 22/30/3E
Controller: 60-80A ( e.g. SPIN 66, XReg80 )
Spinner: "turbo" Ø 40mm - No.0201559
Propeller: 14/9"
Accu: 3S LiPol 2,2-3,2Ah

Kit contents:
Lightweight gel-coated white fiberglass fuselage and canopy
The wings are in three parts to ease transport and storage
Lightweight wings are made in a balsa framework and covered with Oracover®
Removeable tail surfaces are made in a balsa framework and covered with Oracover®
Vinyl cnc cut stickers
Top quality accessories
Complet assembly manual with step by step illustrations
Mer info på Engelsk
Flere så også på