Produktinformasjon
Lumenier QAV-X Charpu FPV Racing Quad 4mm FRSKY. Her leveres en ferdig bygget 214mm racedrone med FRSKY-mottaker, men ingen radio, lader eller batteri. Modellen har ferdig montert motorer, regulatorer, FC, videolink.
The RTF (Ready to Fly) Lumenier QAV-X CHARPU w/ FrSky Rx. The QAV-X is built for racing and features a light-weight, symmetrical carbon fiber body. Fully built and professionally tuned.
Lumenier QAV-X CHARPU
The Lumenier QAV-X CHARPU FPV racing quadcopter is a symmetrical X, light weight, super stiff, finely tuned airframe designed for high performance FPV Drone Racing. The QAV-X was created in collaboration with and named after the World-Famous Lumenier team pilot, CHARPU as featured in WIRED video article. This racing airframe is stripped down to the bare essentials without sacrificing strength and durability. This version features the durable 4mm carbon fiber main unibody plate.
The QAV-X features a unique FPV camera and HD mounting system. The FPV camera is recessed partially below top plate and protected by the top cross bar, guarding your electronics. At the same time, the camera side walls act as an angled wedge to set your HD camera on for recording, such as a GoPro, at a 35 degree angle. No need to 3D print custom mounts to angle up your camera anymore, just add some of the included neoprene foam, securely strap down your camera and fly!
This model has been fully built and test flown for you, so you can simply bind your FrSky radio and go! Our professional build team takes the guess work out of building and tuning for you by pre-programming the flight controller settings and using only high quality Lumenier motors, ESCs and FPV gear.
Features
This version is fully built, test flown and comes with everything to get you going. Just bind the receiver and setup your radio and youre good to go.
Dual purpose FPV and HD camera mounting solution.
Compact size for 5" propellers, 214mm motor to motor.
Black Oxide steel screws
Easy grip black anodized spacers
Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
"Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).
LiPo battery protection plate included.
Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
Lightweight and rigid
Weight
Airframe: 88g (airframe + hardware), 93g (with battery protector plate).
AUW: The QAV-X CHARPU FPV Quadcopter is flown with an AUW of 295 (excluding battery)
Included Components and Parts
A fully built and tested Lumenier QAV-X CHARPU FPV Racing Quadcopter (4mm)
5" Anti-Vibration neoprene tape
1x Lumenier lipo strap
8x Lumenier 5x4x3 (4xCW, 4xCCW Colors may vary)
4x Lumenier RX2206-11 2350Kv motors
4x Lumenier 30A BLHeli_S ESC OPTO (2-4s) DSHOT
1x Lumenier CM-650 Mini - 650TVL Camera
1x Lumenier TX5G2R Mini 200mW 5.8GHz FPV Transmitter with Raceband
1x F4 Advanced Flight Controller pre-programmed and test flown using SBUS receivers
1x FrSky X4R-SB - 3/16 Channel Receiver w/ SBUS(D8 Protocol)
The airframe is professionally hand built and test flown.
Pictures might vary from actual product.
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!