Print produktark

Hobbyzone Carbon Cub S+ 1.3m BNF Basic

Ikke lenger lagerført
Årsak kan være at produktet er utgått fra leverandør, erstattet med ny vare, eller har hatt for liten etterspørsel. Eventuelle spørsmål kan rettes til kundeservice.
Produktinfo
Anbefalt tilbehør
Deler
Tips en venn
Anmeldelser

Produktinformasjon

1,3m vingespenn
SAFE teknologi
BNF (Bind n' Fly)
Hobbyzone leverer her Cub i BNF-utgave med vingespenn på 1,3m. Modellen krever enkel montering og nødvendig tilbehør er listet nedenfor. Modellen kommer også med SAFE teknologi som bl.a. hjelper deg til å holde den stabil under flyvning ved å sette begrensinger på pitch og roll samt en "panikk bryter" som retter opp modellen ved aktivering.

Anbefalt tilbehør

PS! Produkt kan avvike fra video.Les merKlippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.

OK
Hobbyzone Carbon Cub S+ 1.3m BNF Basic

Store landingshjul gjør modellen mindre kresen på underlaget der du letter og lander. Flottører kan kjøpes utenom.

Spesifikasjoner
Vingespenn1300mm
Lengde865mm
Vekt flyklar1023 - 1075g
MaterialeEPO

Nødvendig tilbehør
  • Spektrum radio og mottaker med 6+ kanaler og DSMX
  • 1300-2200mAh 3s LiPo batteri
  • Passende lader

  • Eskens innhold
  • 1stk Carbon Cub S+ 1,3m BNF
  • 1stk Spektrum DSMX mottaker/Flight controller
  • 1stk Parkzone 18A BL ESC
  • 1stk Parkzone 480 BL "outrunner" motor, 960Kv
  • 4stk Parkzone servoer
  • 1stk brukermanual

  • OBS!
    Batteriene under anbefalt tilbehør leveres med XT60 kontakt, en overgang er nødvendig for å kunne bruke disse batteriene på modellen.
    Product details in english
    Needed to Complete
  • 6+ channel full-range transmitter with Spektrum DSMX®/DSM2® technology
  • 1300-2200mAh 3S 11.1V LiPo flight battery
  • Suitable Charger

  • Whats in the box?
  • (1) HobbyZone® Carbon Cub S+ 1.3m BNF
  • (1) Spektrum DSMX Receiver/Flight Controller
  • (1) Parkzone® 18A BL ESC
  • (1) Parkzone 480 BL Outrunner Motor, 960Kv
  • (4) Parkzone Servos
  • (1) User Manual

  • Whether youve never flown RC before or you got your first taste of flying with a multirotor drone, the revolutionary Carbon Cub S+ is the most versatile, capable and easiest to fly RC airplane yet. Based on the Carbon Cub by Cub Crafters, an upgraded and thoroughly modern iteration of the classic Super Cub, and equipped with Horizon Hobbys exclusive and innovative SAFE® Plus GPS-enabled drone technology, this scale reproduction makes it easier to learn to fly in less time than ever before. Advanced features including AutoLand, Holding Pattern and Virtual Fence make it easy for almost anyone to fly successfully from their very first flight, while additional features including oversized tundra tires and optional flaps and floats offer the capability and versatility to fly from almost any surface, anywhere.

    Oversized Tundra Tires
    Thick grass, gravel paths, dirt trails - Tundra wheels can tackle these and many other surfaces that would be impossible for most models of this size to handle.

    Optional Flaps
    The functional flaps are an option for impressive short-field takeoff and landing performance. This feature requires a 7+ channel computer transmitter, a flap servo, and a servo extension. (Sold Separately)

    Optional Floats
    Turn your model into a float plane with the optional Hobbyzone float set. Installation takes just a few minutes and all the necessary hardware is included with the aircraft and float set.

    SAFE Technology

    AutoLand
    When activated after holding down a button, the advanced AutoLand function puts the Carbon Cub S+ on a stabilized approach to autonomously land near the GPS initialization point. You can even provide some directional guidance to avoid obstacles or to adjust the approach while letting the system do the rest to execute a safe landing. As your skills progress and you gain more confidence you can take over more of the control inputs, eventually learning to land without any assistance from the automated system at all.

    Holding Pattern
    This handy SAFE Plus exclusive feature lets you essentially "pause" a flight by putting the airplane into a GPS-guided holding pattern. When activated after the quick press of a button, the airplane will automatically return to a position above the GPS initialization point and circle until the command is cancelled. Its a great way to safely hand the controls to a friend or to regain visual contact if you ever lose sight of the model.

    Virtual Fence
    Its easy to accidentally let an RC airplane fly too far away, but with Virtual Fence worry no more because it creates an invisible boundary the airplane wont fly past. When the airplane reaches this boundary it will automatically turn around and fly back toward the GPS initialization point, then it will wag the wings to let you know when you have control again.

    Panic Recovery
    If you ever lose control of the airplane in the more advanced control modes simply switch to Beginner Mode and release the control sticks. SAFE® Plus technology will automatically return the airplane to level flight.

    Beginner Mode
    Pitch and bank angle limits prevent over-control that can result in a loss of orientation and crashes. When the control sticks are released the airplane returns to level flight on its own. Best of all takeoffs are as simple as giving full throttle and letting the airplane fly off the ground or by giving it a quick hand launch.

    Intermediate Mode
    More freedom in pitch and bank, but still prevents over-control and does not return to level flight on its own. This mode allows you to make tighter turns and to climb and descend faster as your skills advance. Beginner mode automatically activates and returns the airplane to level flight when the airplane descends below approximately 30 feet above ground level and the sticks are released.

    Experienced Mode
    No pitch or bank angle limits so you have complete control! You can even fly inverted (upside down) and perform aerobatic maneuvers including loops, rolls, stall turns and more. Panic Recovery Mode can be activated by switching to Beginner Mode and releasing the sticks.

    Approximate Flight Time:5-7 min
    CG (Center of Gravity):62-68mm back from leading edge of wing @ root
    Completion Level:Bind-N-Fly Basic
    Flaps:Optional
    Flying Weight:36.1 - 37.9 oz (1023 - 1075 grams)
    Length:865mm (34.0 inches)
    Material:Durable EPO
    Minimum Required Radio:4+ Channel, 6+ for SAFE features, 7+ for optional flaps
    Minimum Speed Control:18 amp brushless ESC
    Motor Size:480 Brushless Motor 960kV
    Propeller Size:9 x 6
    Recommended Motor Battery:1300-2200mAh 3 cell LiPo (Sold Separately)
    Wing Tube Length:410mm
    Wing Tube OD:10mm
    Wingspan:1300mm (51.0 inches)
    Mer info på Engelsk

    Anbefalt tilbehør

    Bronto LiPo-Safe Bag / Transportbag (M)
    3|569|523
    kr 165,-
    Bronto Lipo-Safe Bag 30x23cm (L)
    3|182|523
    kr 119,-
    SkyRC E680 12/220V 80W Computerlader
    3|280|235
    kr 699,-
    HobbyZone Super Cub LP, Carbon Cub S+ Floats
    3|2|88
    kr 529,-

    Produktanmeldelser

    Desverre ingen tilbakemeldinger på dette produktet enda.

    Gi din tilbakemelding
    Produkt
    Hobbyzone Carbon Cub S+ 1.3m BNF Basic
    Velg karakter
    Overskrift
    Produktanmeldelse
    Retningslinjer
    Produktanmeldelser er ment for at du skal dele din erfaring med andre som søker kunnskap om produktet.
    Urelevant, uriktig eller støtende innhold vil bli fjernet.

    Spørsmål, reklamasjoner e.l: kontakt oss direkte
    Flere så også på