Produktinformasjon
Immersion Vortex Racing Quad i ferdig montert ARF-sett. Leveres i oppbevaringsbag.
Specifications
- Weight: about 415g without battery, or HD camera
- Power Requirements: 3s-4s LiPo (typical)
- ESCs: Full Custom, 20A cont. 22A peak, rotorSENSE, OneShot125
- Motors: Custom V-Spec 2204-2300kV, with 3mm axles, 5mm shafts
- Props: OEM Gemfan 5045 GF Blunt-Nose
- Flight Camera: FatShark 700TVL v2 CMOS (included)
- HD Camera: GoPro Hero, Hero 3/4
- Receiver Compatibility: CPPM, S-Bus, Spektrum?, XBus, SumH, SumD (no external adapters required)
- Flight Time: Highly dependent upon battery, and flying style
Included in the box:
- 1x Vortex 250 Pro Race Quad, Fully assembled and tested
- 1x Vortex 250 Pro Zipper case, fits 250 and 270 versions (5" or 6" props), with two zipper pockets
- 2x ImmersionRC Branded battery straps (Installed)
- 1x SpiroNET Omni 5.8GHz antenna
- 1x PPM Interface Cable
- 1x Spektrum(tm) Interface Cable
- 1x SBus Interface Cable
- 8x OEM Gemfan 5045BN GFK Props
- Packaging is the zipper case, with protective outer sleeve.
Upgraded versionA little upgrade for the Vortex 250 Pro that we slipped into production. New LED board with 12 LEDs instead of 8 on the previous version. Also includes a snap-on translucent diffuser which greatly increases the viewing angle of the LEDs. One more thing... a connector on the back of the PCB optionally allows a solder-free connection to the PDB using a short cable (via the FUN connector).
BMID
Vortex 285 vs. 250 Pro Comparison
The Vortex 285, and the new 250-Pro are quite different quads. The 285 has the advantage of foldability, making it ideal for transport, and building into compact flight-cases.
The 250 Pro has the advantage of a more powerful processor, higher-current ESCs, and some larger (and heavier) motors.
Deler
c
654
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
Immersion Vortex 20A ESC
kr 345,-
0|0,-
Uten din rabatt kr 345,-
3|5|34
|
654
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
Immersion Vortex 250Pro Pimp Kit. Delene kommer i klar plast og det følger med klistermerker til å feste på, designet av Phil Freybott. Den gjennomsiktige plasten gir kule effekter ved montering av ledlys (lys medfølger ikke).
kr 385,-
0|0,-
Uten din rabatt kr 385,-
3|7|34
|
Deler du savner? Klikk her!