Produktinformasjon
JR sin egen flybarless-enhet for 500-size og større helikopter.
PS! Produkt kan avvike fra video.
Les merKlippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.
OK
A new era of FBL control with the JR 3 axis Gyro system
MEMS 3 Axis Gyro Sensor Control
The TAGS01 utilizes an advanced control algorithm with a wide dynamic range. This allows unmatched hovering stability combined with extreme maneuverability during 3D flight.
Direct Setup Method
The basic settings can be intuitively carried out using only the switches and dials, which are incorporated separately for each function in the control unit.
MEMS Sensor
Each axis utilizes an advanced control algorithm with a wide dynamic range.
Digital Filter
A 32 bit high speed CPU reduces the effects of vibration by digitally processing all information from the sensors, to achieve very stable flying characteristics.
Swash Mix Scan Function
The CCPM settings in the transmitter are recognized by the gyro during calibration. The CCPM settings are not changed during installation of the TAGS01.
New Function: Pirouette Compensation
Pirouette Compensation operates effectively at all pirouette speeds, adding stability and precision to all phases of flight.
New Function: E-ring limiter
During 3D maneuvers, when extreme aileron and elevator controls are combined, the E-ring function limits servo movement to avoid binding (jamming) of the swash plate. This eliminates damage to servos or rotor head linkages.
G-Tune for TAGS01: Dedicated software and USB interface cable
It is possible to connect the TAGS01 to a PC for fine tuning and access to additional functionality. An additional dedicated USB interface cable and software will be required.
Specifications
[Gyro Control Unit /TAGS01-A] Dimensions: 37mm x 11.5mm x 5mm Weight: 21g
[Gyro Sensor Unit /TAGS01-S] Dimensions: 27mm diameter x10mm Weight: 14g
Direct Setup Method
Swash Mix Scan Function
Reverse Switch
Gain Adjust: Aileron, Elevator, Rudder
Items Included:
Gyro Control Unit / TAGS01-A: (1)
Gyro Sensor Unit / TAGS01-S: (1)
Sensor Unit Extension Cable: (1)
Lead Harness B: (5)
Dial Adjusting Screwdriver: (1)
Double-sided Tape for Fixing Sensor Unit: (3)
Sensor Angle Changing Housing (1)
Operation Manual: (1)
TAGS01 Stickers: (1)
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!