Produktinformasjon
6S LiPo for blant annet Align T-Rex 600E Pro. Batteriet leveres uten batteriplugg, og med XH-balanseringskontakt.
Output:22.2V(6S1P)3300mAh 73Wh Dimension:43x143x39.5mmWeight:514g
Anbefalt tilbehør
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 119,-
0| 0,-
Uten din rabatt kr 119,-
3|182|523
NYHET!
GRATIS FRAKT*
* Dette produktet kvalifiserer til gratis frakt. Andre varer i samme ordre vil da også få gratis frakt.
Unntak er varer med egne spesifike fraktkriterier.
kr 135,-
0| 0,-
Uten din rabatt kr 135,-
3|407|523
This Li-poly battery is using series/balancing design, features high efficient and high discharge, use a inspection machine to match packs, suitable for TREX 500 - TREX 600 series. TREX 600E PRO suggest to use two 6s 22.2V lipo batteries connected in series for having both power and flight duration.Max Continuous Discharge: 40C, Burst Discharge: 50C. Normal operating temperature is approx. 40-65C(within 80% of rated discharge). Max. temperature: 80°C.Recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)
NOTE:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity cant exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35C in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.Do not leave the charger is operating unattended as it may cause a fire.
Deler
Finn delene enkelt
Dette produktet har PartFinder
Partfinder er tilrettelagt for å enklest mulig finne riktig del til produktet vha. sprengskisser og/eller delelister.
Åpne PartFinder
c
Deler du savner? Klikk her!